Product Details:
Type | ATS Controller |
Usage/Application | Current, power & energy monitoring |
Brand | SOCOMEC |
Model Name/Number | ATyS C65 |
Power/Voltage | 24 VDC aux power supply |
Protection | IP65 |
ATyS C65
ATS Controller
Advanced functionalities
ATyS C65 is an advanced ATSE controller offering all the functions of the ATyS C55 with the addition of current, power & energy monitoring, increased I/O capacity and functions, load shedding, lift control function, energy backup, increased number of events and alarms (measurement and combination alarms) and DIRIS Digiware module compatibility.
Advantages
Fast commissioning
On initial power up, the ATyS C65’s smart wizard will guide the operator through the commissioning process.
User customisable
Front face LEDs, Load shedding, Genset schedulers and the lift control signal are just a few of the many customisable features available on ATyS C65.
Intuitive operation
• The high-resolution LCD screen provides several dashboards enabling easy monitoring of all parameters, including power and energy consumption of the loads.
• The integrated energy backup provides transitional power to the product enabling status indication (switch position, timer status, fault notifications) and communication to remain active with no supply present.
• Quick and easy access to main functions through the front face with direct key input.
• Complete configuration can be achieved through the front face or via software (EasyConfig).
General characteristics
• Self-powered from sensing.
• Wide voltage range (88 - 576 VAC).
• 24 VDC aux power supply (for optional use).
• 2 latching relays.
• Digiware IO-10: I/O extension up to 30 inputs and 18 outputs.
• Power & Energy metering with /1 A or /5 A current transformers.
• Energy backup.
• IP65 degree of protection (panel gasket included).
• 3000 Alarms and Events.
• Multiple fully configurable timers, thresholds and I/O.
• Easy config configuration software.
• Shock resistant IK08+.
• Digiware compatible (replaces U module).
• Ethernet, SNMP, BACnet using DIRIS M-70 gateway. Includes Webserver.
• A DIRIS Digiware D-70 gateway can be used as a remote display for multiple ATyS C55/C65 controllers; the D-70 also provides Ethernet, SNMP & BAC net connectivity
Product Details:
Brand | Socomec |
Input Voltage | 230 v |
Configuration | 3 Phase IN - 3 Phase OUT |
Power | 3 Kva |
Phase | Single |
Frequency | 50 Hz |
Socomec UPS ITYS-E 230V: Single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 2500.000 in Gram
Brand : Socomec
Technical Specification
Model: ITYS-E
ITYS ES
Solution for electrical substations
Single/single phase UPS from 1000 to 3000 VA - Electrical Substation
The solution for
• Electric lines
Advantages
High protection and high availability
• ITYS ES guarantees permanent regulation of the output voltage and frequency. This technology is compatible with all IT and industrial applications and operating environments, installations with generator sets included.
• Wide tolerance on input voltage ensures that switchovers to battery mode are infrequent, significantly prolonging battery lifetime.
• The automatic bypass device switches over in zero time in the event of overload or failure, guaranteeing uninterrupted services.
Straightforward to install and easy to use
• ITYS ES, with the manual bypass option is easy to install without any special plant engineering preparation, as it is equipped with built-in thermal protection.
• The LCD monitoring/control panel and a buzzer make the equipment extremely easy and intuitive to use. The graphic indicating the power distribution path shows at a glance whether or not the system is working as it should.
• Battery efficiency can be tested via the control panel or using dedicated software.
Product Details:
Brand | Socomec |
Model Name/Number | RS232 |
Input Voltage | 230 v |
Phase | Single |
Power Consumption | 21 Wa |
Power | 2 Kva |
Socomec UPS ITYS-E 21WA Single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 2500.000 in Gram
Brand : Socomec
Technical Specification
Model: ITYS-E
ITYS ES
Solution for electrical substations
Single/single phase UPS from 1000 to 3000 VA - Electrical Substation
The solution for
• Electric lines
Product Details:
Brand | Socomec |
Input Voltage | 230 v |
Usage/Application | Industrial |
Power Source | Electric |
Frequency | 50 Hz |
Power | 6 Kva |
Socomec UPS ITYS-E 6KVA single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 2500.000 in Gram
Brand : Socomec
Technical Specification
Model: ITYS-E
ITYS ES
Solution for electrical substations
Single/single phase UPS from 1000 to 3000 VA - Electrical Substation
The solution for
• Electric lines
Product Details:
Brand | Socomec |
Input Voltage | 230 v |
Frequency Range | 50-60 Hz |
Power | 10 Kva |
Power Source | Electric |
Socomec UPS ITYS-E 10KVA: Single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 2500.000 in Gram
Brand : Socomec
Technical Specification
Model: ITYS-E
ITYS ES
Solution for electrical substations
Single/single phase UPS from 1000 to 3000 VA - Electrical Substation
The solution for
• Electric lines
Socomec UPS ITYS-E 10KVA Advantages
High protection and high availability
• ITYS ES guarantees permanent regulation of the output voltage and frequency. This technology is compatible with all IT and industrial applications and operating environments, installations with generator sets included.
• Wide tolerance on input voltage ensures that switchovers to battery mode are infrequent, significantly prolonging battery lifetime.
• The automatic bypass device switches over in zero time in the event of overload or failure, guaranteeing uninterrupted services.
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 800A |
Brand | Socomec |
Power/Voltage | 415 V |
Pole Count | 4 |
Rated Frequency | 50 Hz |
Socomec 3150A Four Pole manual changeover switch: SIRCOVER products are manually operated transfer switches with positive break indication.
There are 3 ranges in the series:
They provide on-load transfer between two sources for any low voltage power circuit, as well as safety isolation by double breaking per pole. Other applications include source inversion (e.g. to change the direction of a motor) or grounding/earthing.
Advantages
A complete range
There are 3 SIRCOVER models to meet every need: The standard model I-0-II, the overlapping contact model I-I+II-II and the Bypass model.
Easy to connect
For ratings of 2000 to 3200 A, we offer copper bar connection pieces. This gives you the option of different connection methods - flat, edgewise with top or bottom bridging.
Stable positions
SIRCOVER devices have three stable positions, unaffected by voltage fluctuations and vibrations, protecting your loads from network disturbances.
On-load switching
With its AC-23 and AC-33 characteristics, tested according to standards IEC 60947-3 and IEC 60947-6-1, the SIRCOVER enables safe on-load switching for any type of load. With its on-load transfer capabilities, it is not
necessary to isolate loads prior to transfer therefore the SIRCOVER offers an economical solution.
Weight : 150000.000 in Gram
Brand : Socomec
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 315 A |
Brand | Socomec |
Power/Voltage | 415 V |
Pole Count | 4 |
Rated Frequency | 50 Hz |
Socomec Sircover 315A: SIRCOVER products are manually operated transfer switches with positive break indication.
There are 3 ranges in the series:
They provide on-load transfer between two sources for any low voltage power circuit, as well as safety isolation by double breaking per pole. Other applications include source inversion (e.g. to change the direction of a motor) or grounding/earthing.
Advantages
A complete range
There are 3 SIRCOVER models to meet every need: The standard model I-0-II, the overlapping contact model I-I+II-II and the Bypass model.
Easy to connect
For ratings of 2000 to 3200 A, we offer copper bar connection pieces. This gives you the option of different connection methods - flat, edgewise with top or bottom bridging.
Stable positions
SIRCOVER devices have three stable positions, unaffected by voltage fluctuations and vibrations, protecting your loads from network disturbances.
On-load switching
With its AC-23 and AC-33 characteristics, tested according to standards IEC 60947-3 and IEC 60947-6-1, the SIRCOVER enables safe on-load switching for any type of load. With its on-load transfer capabilities, it is not
necessary to isolate loads prior to transfer therefore the SIRCOVER offers an economical solution.
Weight : 12000.000 in Gram
Brand : Socomec
Product Details:
Brand | Socomec |
Input Voltage | 415 V |
Configuration | 3 Phase IN - 3 Phase OUT |
Phase | Single |
Frequency | 50 Hz |
Humidity | 95% |
Output Current | 20kVA |
Usage/Application | Industrial |
Socomec UPS ITYS 20kVA Single-phase UPS:
Single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 10000.000 in Gram
Brand : Socomec
Technical Specification
ITYS
Reliable and versatile power protection
Single/single and three/single phase UPS from 1 to 10 kVA The solution for
Product Details:
Brand | Socomec |
Input Voltage | 230 v |
Configuration | 3 Phase IN - 3 Phase OUT |
Form Factor | Tower Model |
Usage/Application | Industrial |
Frequency | 50 Hz |
Power | 11 kva |
Socomec UPS NETYS 11kVA Single-phase UPS solutions are designed to provide distributed or centralized protection against voltage fluctuations and power outages. They can therefore be used to prevent load shutdowns or energy blackouts lasting several minutes that could otherwise cause significant damage to ongoing operations.
These single-phase UPS are suitable for many uses including small offices, home offices, game consoles and workstations, ATMs and shops, offices, SMEs, server rooms, infrastructure and light industrial applications.
Weight : 2500.000 in Gram
Brand : Socomec
Technical Specification
Model: NETYS RT
NETYS RT
Total protection on rack or tower
Single/single phase UPS from 1100 to 11000 VA
The solution for for multiple applications including
Socomec UPS NETYS RT Advantages
High protection and availability
Simple to install
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 1000 A |
Brand | Socomec |
Power/Voltage | 415 V |
Rated Frequency | 50 Hz |
Socomec 1000A, 2000A,1250A & 2500A 4 pole bypass COS is a manually operated changeover switch. It is a combination of three interlocked switches enabling the use with 4 + 8 poles. It insulates by providing simultaneous safety isolation top and bottom and Bypassing loads of low voltage circuits mainly during maintenance operations.
Weight : 90000.000 in Gram
Brand : Socomec
Technical Specification
Advantages
High Thermal and Dynamic withstand capacity
The product has been tested for high short-circuit withstand level, effectively managing the electrodynamics stresses encountered during faulty condition.
Quick make break
The mechanical linkages are designed to be sturdy and fast acting, to take care of arching and stresses encountered during making and breaking operation.
Safety
Padlocking possible in all 3 positions, this features ensures protection against tampering with desired source selection position.
High Electrical and Mechanical endurance
The product has been specifically tested to endure high number of operating cycles, contributing to enhanced product life cycle performance.
Design
Unique design of Terminals with integrated Spreaders, helps manage aluminum cable termination without need of phase barriers.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A
b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A
2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A
Product Details:
Switch Control | Manual |
Poles Number | 4 |
Usage/Application | Industrial |
Current Rating | 1600A |
Brand | Socomec |
Phase | Single Phase |
Power/Voltage | 415 V |
Socomec 1600A & 1250A 4 pole bypass COS is a manually operated changeover switch. It is a combination of three interlocked switches enabling the use with 4 + 8 poles. It insulates by providing simultaneous safety isolation top and bottom and Bypassing loads of low voltage circuits mainly during maintenance operations.
Weight : 90000.000 in Gram
Brand : Socomec
Technical Specification
Advantages
High Thermal and Dynamic withstand capacity
The product has been tested for high short-circuit withstand level, effectively managing the electrodynamics stresses encountered during faulty condition.
Quick make break
The mechanical linkages are designed to be sturdy and fast acting, to take care of arching and stresses encountered during making and breaking operation.
Safety
Padlocking possible in all 3 positions, this features ensures protection against tampering with desired source selection position.
High Electrical and Mechanical endurance
The product has been specifically tested to endure high number of operating cycles, contributing to enhanced product life cycle performance.
Design
Unique design of Terminals with integrated Spreaders, helps manage aluminum cable termination without need of phase barriers.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 125A |
Brand | Socomec |
Power/Voltage | 380 V |
Rated Frequency | 50 Hz |
Socomec Sircover 125A, 200A & 63A: SIRCOVER products are manually operated transfer switches with positive break indication.
There are 3 ranges in the series:
available in 3 or 4 pole.
They provide on-load transfer between two sources for any low voltage power circuit, as well as safety isolation by double breaking per pole. Other applications include source inversion (e.g. to change the direction of a motor) or grounding/earthing.
Advantages
A complete range
There are 3 SIRCOVER models to meet every need: The standard model I-0-II, the overlapping contact model I-I+II-II and the Bypass model.
Easy to connect
For ratings of 2000 to 3200 A, we offer copper bar connection pieces. This gives you the option of different connection methods - flat, edgewise with top or bottom bridging.
Stable positions
SIRCOVER devices have three stable positions, unaffected by voltage fluctuations and vibrations, protecting your loads from network disturbances.
On-load switching
With its AC-23 and AC-33 characteristics, tested according to standards IEC 60947-3 and IEC 60947-6-1, the SIRCOVER enables safe on-load switching for any type of load. With its on-load transfer capabilities, it is not
necessary to isolate loads prior to transfer therefore the SIRCOVER offers an economical solution.
Weight : 4000.000 in Gram
Brand : Socomec
Technical Specification
OPEN EXECUTION - Switch
The solution for
Strong points
Conformity to standards
We also provide the complete range of SOCOMEC transfer switches required for different applications in industry grids.
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 200 A |
Brand | Socomec |
Voltage | 415 A |
Frequency | 50 Hz |
Socomec 200A, 800A & 1000A 4 pole COS is a manually operated changeover switch. It is a combination of three interlocked switches enabling the use with 4 + 8 poles. It insulates by providing simultaneous safety isolation top and bottom and Bypassing loads of low voltage circuits mainly during maintenance operations.
Weight : 12000.000 in Gram
Brand : Socomec
Technical Specification
Advantages
High Thermal and Dynamic withstand capacity
The product has been tested for high short-circuit withstand level, effectively managing the electrodynamics stresses encountered during faulty condition.
Quick make break
The mechanical linkages are designed to be sturdy and fast acting, to take care of arching and stresses encountered during making and breaking operation.
Safety
Padlocking possible in all 3 positions, this features ensures protection against tampering with desired source selection position.
High Electrical and Mechanical endurance
The product has been specifically tested to endure high number of operating cycles, contributing to enhanced product life cycle performance.
Design
Unique design of Terminals with integrated Spreaders, helps manage aluminum cable termination without need of phase barriers.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A
b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switching Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 125A |
Brand | Socomec |
Voltage | 415 V |
Frequency | 50 Hz |
Weight : 25000.000 in Gram
Brand : Socomec
Technical Specification
Number of Poles 4 Pole
Voltage 415V
Hz50 Hz
The SOCOMEC bypass COS is a manually operated changeover switch. It is a combination of three interlocked switches enabling the use with 4 + 8 poles. It insulates by providing simultaneous safety isolation top and bottom and Bypassing loads of low voltage circuits mainly during maintenance operations.
Advantages
High Thermal and Dynamic withstand capacity
The product has been tested for high short-circuit withstand level, effectively managing the electrodynamics stresses encountered during faulty condition.
Quick make break
The mechanical linkages are designed to be sturdy and fast acting, to take care of arching and stresses encountered during making and breaking operation.
Safety
Padlocking possible in all 3 positions, this features ensures protection against tampering with desired source selection position.
High Electrical and Mechanical endurance
The product has been specifically tested to endure high number of operating cycles, contributing to enhanced product life cycle performance.
Design
Unique design of Terminals with integrated Spreaders, helps manage aluminum cable termination without need of phase barriers.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
1. Automatic transfer switches range
a. ATyS tM, Gm & pM : Modular and compact Automatic Transfer Switch from 40 to 160A
b. ATyS t, g & p:
All-in-one Automatic Transfer Switch for all applications from 125 to 3200A
c. ATyS Bypass:
Enclosed Automatic Transfer Switchin Equipment with Bypass from 125 to 3200A
d. STATYS:
Static Transfer Switch for IT applications with no downtime during transfer from 16 to 1600A
2. Remotely operated transfer switches range
a. ATyS S, ATyS d S:
Motorized and Remotely Operated Transfer Switch from 40 to 125A
b. ATyS d M:
Motorized and Remotely Operated Transfer Switch modular from 40 to 160A
c. ATyS r and ATyS d :
Motorized and Remotely Operated Transfer Switch from 125 to 3200A
d. ATyS d H :
Motorized and Remotely Operated Transfer Switch from 4000 to 6300A
3. Manual transfer switches range:
a. SIRCO M :
Compact Modular Manual transfer switches from 25 to 125A
b. SIRCO VM1 :
Modular Manual transfer switches with visible breaking from 63 to 125A
c. SIRCOVER :
Manual transfer switches from 125 to 3200A
d. SIRCOVER ATS Bypass :
Manual switch to perform bypass on ATS product from 125 to 1600A
e. SIRCOVER PV:
Manual transfer switch for DC or photovoltaic applications from 200 to 630A
Product Details:
Switch Control | Manual |
Usage/Application | Industrial |
Current Rating | 100A |
Brand | Socomec |
Voltage | 415 V |
Frequency | 50 Hz |
Socomec Sircover 100A, 160A & 250A: SIRCOVER products are manually operated transfer switches with positive break indication.
There are 3 ranges in the series:
available in 3 or 4 pole.
They provide on-load transfer between two sources for any low voltage power circuit, as well as safety isolation by double breaking per pole. Other applications include source inversion (e.g. to change the direction of a motor) or grounding/earthing.
Socomec Sircover 250A Advantages
A complete range
There are 3 SIRCOVER models to meet every need: The standard model I-0-II, the overlapping contact model I-I+II-II and the Bypass model.
Easy to connect
For ratings of 2000 to 3200 A, we offer copper bar connection pieces. This gives you the option of different connection methods - flat, edgewise with top or bottom bridging.
Stable positions
SIRCOVER devices have three stable positions, unaffected by voltage fluctuations and vibrations, protecting your loads from network disturbances.
On-load switching
With its AC-23 and AC-33 characteristics, tested according to standards IEC 60947-3 and IEC 60947-6-1, the SIRCOVER enables safe on-load switching for any type of load. With its on-load transfer capabilities, it is not
necessary to isolate loads prior to transfer therefore the SIRCOVER offers an economical solution.
Weight : 10000.000 in Gram
Brand : Socomec
Technical Specification
OPEN EXECUTION - Switch
The solution for
Strong points
Conformity to standards
We also provide the complete range of SOCOMEC transfer switches required for different applications in industry grids.
Product Details:
Brand | SOCOMEC |
Automation Grade | Automatic |
Number Of Phase | 1-3 Phase |
MOUNTING | Door / Din rail |
Power supply | 24 VDC aux power supply |
Voltage range | 184-300 VAC |
Product Details:
Rated Current | 24 VDC aux power supply |
Brand | SOCOMEC |
Phase | Three-phase + Neutral & Single-phase + Neutral networks |
Automation Grade | Automatic |
Product Code | ATyS C25 |
Mounting | Door / Din Rail |
ATyS C25 ATS Controller is an entry level ATSE controller with communications. It can be used to pilot a remotely operated transfer switch, such as ATyS r, ATyS S and ATyS d M, as well as contactors. ATyS C25 ensure the automatic or remotely controlled transfer from one source to another with fixed timers and thresholds.
Weight : 1000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS C25
ATYS C25 ATS CONTROLLER ADVANTAGES
FLEXIBLE SPACE SAVING
The ATyS C25 controller can be mounted on either a DIN rail or to the panel door, offering flexibility and optimising space.
COST-EFFECTIVE
The ATyS C25 has an integrated DPS, for supplying the motorization of the switch, and can be door mounted, therefore there’s no need for an external DPS or display, reducing installation time and costs.
FAST COMMISSIONING & TESTING
• 8 dip-switches allow very fast commissioning, even offline.
• All main functions such as remote position control, mode selection, lamp test and genset test on load are available on the front of the product allowing quick and easy operation.
• Remote product information is available through RS485 Modbus communication.
GENERAL CHARACTERISTICS
• Self-powered from sensing.
• Wide voltage range (184-300 VAC).
• 24 VDC aux power supply (for optional use).
• Main/Main or Main/Genset networks.
• Fixed I/Os.
• RS485 Modbus communication.
• Voltage sensing on all phases.
• Three-phase + Neutral & Single-phase + Neutral networks.
• Phase rotation checking.
• Door or DIN rail mounting.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
Product Details:
Brand | SOCOMEC |
Power | 24 VDC aux power supply |
Automation Grade | Automatic |
Protection Type | IP65 |
Communication protocol | RS485 Modbus |
Voltage range | 88-576VAC |
ATyS C55 ATS Controller is a complete ATSE controller that can be used to pilot a remotely operated transfer switch of any technology: motorised switches (e.g. ATyS r, ATyS S or ATyS d M), circuit breakers or contactors. ATyS C55 ensure the automatic or remotely controlled transfer from one source to another, with configurable timers and thresholds, for any combination of sources: 2 transformers, 1 transformer and 1 genset or 2 gensets.
Weight : 1000.000 in Gram
Brand : Socomec
Technical Specification
ModelATyS C55
ATyS C55 ATS Controller Advantages
Fast commissioning
On initial power up, the ATyS C55''s smart wizard will guide the operator through the commissioning process.
Versatile
ATYS C55 ADVANTAGES
FAST COMMISSIONING
On initial power up, the ATyS C55’s smart wizard will guide the operator through the commissioning process.
VERSATILE
The ATyS C55 is compatible with contactors, breakers and switches. It can also work for all type of 2-source applications combining mains and gensets.
CLEAR VISUALISATION AND OPERATION
• High-resolution LCD screen with clear defined messages.
• Real-time pop-ups to show timers, alarms, faults and information alerts.
• Quick and easy access to main functions through the front face with direct key input.
• Complete configuration can be achieved through the front face or via software (EasyConfig).
ATYS C55 ATS CONTROLLER GENERAL CHARACTERISTICS
• Self-powered from sensing.
• Wide voltage range (88-576VAC).
• 24 VDC aux power supply (for optional use).
• 2 latching relays.
• Smart commissioning wizard.
• IP65 degree of protection with gasket (accessory).
• 1000 Alarms and Events.
• 6 fully configurable I/O.
• Genset scheduler.
• Door or back plate mounting.
• Main/Main, Main/Genset and Genset/Genset applications.
• Easyconfig configuration software.
• RS485 Modbus communication.
• Ethernet, SNMP, BACnet using DIRIS M-70 gateways. Includes Webserver.
• A DIRIS Digiware D-70 gateway can be utilised as a remote display for multiple ATyS C55/C65 controllers; the D-70 also provides Ethernet, SNMP & BACnet connectivity.
We also provide SOCOMEC transfer switches required for different applications in industry grids.
SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
Product Details:
Rated Current | 125A |
Brand | Socomec |
Changeover Source Type | Dual Source |
Voltage Level | Medium-Voltage |
Power | Electric |
Socomec 125A ATyS S/Sd products are 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.
Weight : 5000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS S
Pole: 4 Pole
Advantages
Extensive power supply range
The ATyS S is available in four supply versions, each with a broad range (+/-30%). The four versions are:
Safety and reliability
ATyS S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults. In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.
Easy integration
ATyS S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.
Simplified maintenance
Maintenance can be carried out easily under load, with manual operation still available. The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.
ATyS d S: Dual power supply
In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring.This is obtained by integrating a double
supply (2 independent supplies) directly within the product.
The solution for
Strong Points
> Extensive power supply range
> Safety and reliability
> Easy integration
> Simplified maintenance
> ATyS d S: Dual power supply
Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048-11
Product Details:
Rated Current | 40 A |
Poles Number | 2 Pole |
Brand | Socomec |
Changeover Source Type | Triple Source |
Power | Electric |
Voltage | 220 V |
Socomec 40A, 100A & 125A ATyS tM and ATyS g M are modular automatic transfer switches with positive break indication. ATyS t M are 4 pole (three-phase) devices and ATyS g M are 2 or 4 pole (single or three-phase) devices.
They have all the functions of the ATyS d M together with an integrated controller, giving them automatic features dedicated to mains/mains (ATyS t M) and mains/genset (ATyS g M) applications. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.
Weight : 4000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS T M
Pole: 4 Pole
SOCOMEC 100A ATYS TM ADVANTAGES
Quick start
ATyS t M and g M transfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.
ATyS g M: dedicated to mains/genset applications
In addition to its single-phase and three phase voltage & frequency monitoring for both incoming sources, the product''''s integrated controller also features functions that are specific to mains/genset applications (genset control, test on load, etc.).
ATyS t M: dedicated to three-phase mains/mains applications
The ATyS t M integrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.
Secure programming
To ensure that the correct configuration is maintained an optional sealable cover can be fitted in order to avoid any unintentional modifications to the programming.
The solution for
Strong Points
Conformity to standards
> IEC 60947-6,-1
> IEC 60947-3
> GB 14048.11
We also provide SOCOMEC transfer switches required for different applications in industry grids.
Product Details:
Rated Current | 60 amps / phase |
Brand | Socomec |
Changeover Source Type | Dual Source |
Power | Electric |
Voltage | 220 V |
Frequency | 50 Hz |
Model Number | 80 A |
Socomec 80A ATyS tM and ATyS g M are modular automatic transfer switches with positive break indication. ATyS t M are 4 pole (three-phase) devices and ATyS g M are 2 or 4 pole (single or three-phase) devices.
They have all the functions of the ATyS d M together with an integrated controller, giving them automatic features dedicated to mains/mains (ATyS t M) and mains/genset (ATyS g M) applications. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.
Weight : 4000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS T M
Pole: 4 Pole
Advantages
Quick start
ATyS t M and g M transfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.
ATyS g M: dedicated to mains/genset applications
In addition to its single-phase and three phase voltage & frequency monitoring for both incoming sources, the product''''s integrated controller also features functions that are specific to mains/genset applications (genset control, test on load, etc.).
ATyS t M: dedicated to three-phase mains/mains applications
The ATyS t M integrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.
Secure programming
To ensure that the correct configuration is maintained an optional sealable cover can be fitted in order to avoid any unintentional modifications to the programming.
The solution for
Strong Points
Conformity to standards
> IEC 60947-6,-1
> IEC 60947-3
> GB 14048.11
Product Details:
Rated Current | 800A |
Poles Number | 2 Pole |
Brand | Socomec |
Changeover Source Type | Dual Source |
Power | Electric |
Voltage | 380 V |
Frequency | 50 Hz |
Socomec 800A, 1000A, 1250A & 2000A ATyS r 3 or 4 pole remotely operated motorized transfer switches with positive break indication.
They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer
Weight : 150000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS R
Pole: 4 Pole
SOCOMEC 2000A ATYS R ADVANTAGESWATCHDOG RELAY TO CHECK PRODUCT AVAILABILITY
ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.
INTEGRATED AUXILIARY CONTACTS
As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.
EXTENDED POWER SUPPLY RANGE
ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.
EVEN MORE ROBUSTThe updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.
The solution for
Strong points
Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048.11
External automatic controller
> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).
We also provide SOCOMEC transfer switches required for different applications in industry grids.
A. SOCOMEC Transfer Switches:
Full range of Manual, Remotely Operated and Automatic Transfer Switches from 16 to 6300 Amps. Providing an unrivalled benchmark in source switching, SOCOMEC is continuously innovating to ensure ever more efficient ways to guarantee the continuity of distribution and, therefore, the rate of availability of your energy. From compact manual transfer switches to the enclosed ATS Bypass, the range of switches covers, as standard, the majority of your switching needs.
Product Details:
Rated Current | 315 A |
Poles Number | 4 |
Brand | Socomec |
Changeover Source Type | Dual Source |
Power | Electric |
Automation Grade | Automatic |
Frequency | 50 Hz |
Voltage | 415 V |
Socomec 315A ATyS r 3 or 4 pole remotely operated motorised transfer switches with positive break indication.
They enable the on-load transfer of two three-phase power supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer
Weight : 12000.000 in Gram
Brand : Socomec
Technical Specification
Model: ATyS R
Pole: 4 Pole
SOCOMEC 315A ATYS R ADVANTAGES
WATCHDOG RELAY TO CHECK PRODUCT AVAILABILITY
ATyS r products are equipped with a Watchdog relay which constantly monitors your product, thereby securing the installation. This relay informs in real time the user of the product''s availability, i.e. whether it is operational and ready for source switching.
INTEGRATED AUXILIARY CONTACTS
As part of the product monitoring function, the ATyS r enable the transmission of information relating to their position. This is possible thanks to the standard integration of an auxiliary contact for each position.
EXTENDED POWER SUPPLY RANGE
ATyS r products offer greater availability thanks to their extensive power supply range of 208 to 277 VAC ± 20%.
EVEN MORE ROBUST
The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.
The solution for
Strong points
Conformity to standards
> IEC 60947-6-1
> IEC 60947-3
> GB 14048.11
External automatic controller
> The ATyS r and ATyS d are compatible with our ATyS C30 external controllers (for mains/mains and mains/ genset applications) and ATyS C40 controllers (for genset/genset applications).
We also provide SOCOMEC transfer switches required for different applications in industry grids.