Schneider Numerical Relays

Product Details:

Easergy MiCOM P64x series provides fast and complete protection for transformer faults, preserving service life. Designed for two and three winding transformers (including autotransformers), it is easy to use and the setting wizard requires only nameplate data. Models available: MiCOM P642, MiCOM P643, MiCOM P645

Product Details:

MiCOM P9xx series of voltage and frequency relays are capable of highly versatile applications and are easily integrated into both new and existing network control systems. They offer improved power quality and are an ideal cost effective solution for maintaining system stability.

Versatile applications and enhanced techniques
Their application versatility and association of protection functions with automation, control and measurement make MiCOM P9xx an optimal, innovative solution for ensuring power system stability and maintenance reduction.

By employing enhanced techniques, designed to operate under non-linear abnormalities and sub-oscillations, MiCOM P9xx eliminates the risk of unwanted operations. With up to 30 output contacts, users can create simple or complex load and generation management schemes using the relay's logic capabilities.

Integrated restoration facilities ensure that any disconnected loads are reconnected as soon as possible after system recovery. Industry standard communication protocols permit easier integration into both new and existing network control systems.

Product Details:

MiCOM P9xx series of voltage and frequency relays are capable of highly versatile applications and are easily integrated into both new and existing network control systems. They offer improved power quality and are an ideal cost effective solution for maintaining system stability.

Versatile applications and enhanced techniques
Their application versatility and association of protection functions with automation, control and measurement make MiCOM P9xx an optimal, innovative solution for ensuring power system stability and maintenance reduction.

By employing enhanced techniques, designed to operate under non-linear abnormalities and sub-oscillations, MiCOM P9xx eliminates the risk of unwanted operations. With up to 30 output contacts, users can create simple or complex load and generation management schemes using the relay's logic capabilities.

Integrated restoration facilities ensure that any disconnected loads are reconnected as soon as possible after system recovery. Industry standard communication protocols permit easier integration into both new and existing network control systems.

Product Details:

Easergy MiCOM P541-P546 series provides high-speed current differential unit protection. The P54x is designed for all overhead line and cable applications, as it interfaces readily with the longitudinal (end to end) communications channel between line terminals. The interface options support direct fibre optic, or multiplexed digital links.

Optimum selectivity is assured, as the scheme measures the currents entering and leaving the protected plant item. Instantaneous tripping results for an internal fault, with stability for any out-of-zone fault. Tripping uses a proven characteristic comparing differential current with through current, for ease of testing. Phase differential elements of this type offer consistent detection of solid and resistive faults, with optimum faulted phase selection, tripping, and indication.

A full range of back-up protection is integrated. This enhances the dependability of the protection, as hot-standby elements (such as distance zones and overcurrent) can be brought into service whenever a signalling channel outage may occur.

Easergy MiCOM P541-P546 series provides high-speed current differential unit protection. The P54x is designed for all overhead line and cable applications, as it interfaces readily with the longitudinal (end to end) communications channel between line terminals. The interface options support direct fibre optic, or multiplexed digital links.

Optimum selectivity is assured, as the scheme measures the currents entering and leaving the protected plant item. Instantaneous tripping results for an internal fault, with stability for any out-of-zone fault. Tripping uses a proven characteristic comparing differential current with through current, for ease of testing. Phase differential elements of this type offer consistent detection of solid and resistive faults, with optimum faulted phase selection, tripping, and indication.

A full range of back-up protection is integrated. This enhances the dependability of the protection, as hot-standby elements (such as distance zones and overcurrent) can be brought into service whenever a signalling channel outage may occur.

Product Details:

Easergy MiCOM P541-P546 series provides high-speed current differential unit protection. The P54x is designed for all overhead line and cable applications, as it interfaces readily with the longitudinal (end to end) communications channel between line terminals. The interface options support direct fibre optic, or multiplexed digital links.

Optimum selectivity is assured, as the scheme measures the currents entering and leaving the protected plant item. Instantaneous tripping results for an internal fault, with stability for any out-of-zone fault. Tripping uses a proven characteristic comparing differential current with through current, for ease of testing. Phase differential elements of this type offer consistent detection of solid and resistive faults, with optimum faulted phase selection, tripping, and indication.

A full range of back-up protection is integrated. This enhances the dependability of the protection, as hot-standby elements (such as distance zones and overcurrent) can be brought into service whenever a signalling channel outage may occur.

Product Details:

MiCOM P12x is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P12x devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

Product Details:

MiCOM P12x is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P12x devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

Product Details:

MiCOM P12x is housed in a compact 4U case in 20TE or 30TE widths, MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P12x devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

Product Details:

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose  and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Product Details:

MiCOM P12x is housed in a compact 4U case in 20TE or 30TE widths,MiCOM P12x is fully withdrawable to facilitate easy and quick replacement. The dual-rated current input is powered by conventional 1A or 5A Current Transformers. A wide-range power supply allows a flexible auxiliary voltage to be applied from 24-250Vdc/48-240Vac. P122 also offers a compact case solution with reduced hardware and functionality where installation space is minimal.

Software features include 2 settings groups for quick switching between application configurations and customisable reflex automation, allowing logical AND, OR or NOT gates.

MiCOM P12x devices also include a rear RS485 communication port with a variety of protocols; DNP3, IEC 60870-5-103, Modbus and Courier.

Standard Manufacturers Warranty: 2 years

MiCOM P12x offers a wide range of protection functions allowing its use in many applications including:

• Main or backup protection on MV/HV systems
• Overhead lines & underground cables, backup on HV systems.
• Insulated, solid earthed, resistance earthed, and Petersen coil earthed neutral systems
• MV subscribers, Industry, Transport
• Generator and Transformer schemes

Product Details:

Easergy MiCOM P849 is the digital input and output extension device for the MiCOM range.

Features

Easergy MiCOM P849 extends the number of digital inputs and digital outputs of existing relays in a secure and reliable way.

It collects digital data from any protection relay and addresses CB commands (open/close) from any protection relay.

Easergy MiCOM P849 provides a fully integrated and compact IO extension device that is easy to install and can perform more flexible applications, such as a Remote Terminal Unit.

Easergy MiCOM P849 is built on the well known Easergy MiCOM Px40 hardware platform and offers:
• Complete solution with the Schneider Electric Easergy MiCOM range
• Numerical technology
• Proven reliability

Latest communication protocols Ethernet Redundancy

Fully Equipped with the latest communications protocols (IEC61850 Ed1 Ed2 available in the same device, selection by setting).
Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network Maintenance network)
Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Major enhancement to Cybersecurity

Operational Cyber Security, compliant to IEC 62351, helps protect installations with security based on embedded features such as Role Based Access Control (RBAC), Port Hardening, Security Logs and Access Traceability. The IED by default includes RBAC with different users defined and a Security Administrator.

Benefits

Economical solution - Flexible - Easy to use - Reliable

Integration of Easergy MiCOM P849 into the overall power system further fulfils the needs of electrical supply utilities and industrial consumers by providing many short term and long term
benefits.
• Cost effective solution for use in multiple applications
• Reliable operation minimises outages
• Information gathering allows efficient operation

Direct cost reduction includes:

• Purchasing cost
• Maintenance cost reduction is achieved through the use of the Easergy MiCOM Px40 series standard hardware

Indirect cost reduction includes:

• No need of Engineering if the default PSL is used.
• GOOSE testing mode

Product Details:

The Easergy MiCOM P740 numerical busbar protection scheme provides scalable and complete protection for all voltage levels, from low to extra or ultra high-voltage busbar configurations.

Easergy Micom P740 is one of the fastest and complete in its class, providing secure and sensitive protection for all types of voltage busbar configurations. It is easily adapted to any configuration and can operate with different types of CT.

Innovative configuration for centralized or distributed architecture

Easergy Micom P740 ensures security, speed and sensitivity due to its innovative configuration that includes CT saturation detection and dynamic topology processing algorithms. Easergy Micom P740 protection, one of the fastest around (13ms operating time) meets the strict requirements imposed by extra/ultra HV voltage transmission systems.

Easergy Micom P740 busbar differential protection scheme can be engineered to provide a centralized or distributed architecture. It also supports easy busbar maintenance, operation and future expansion.

Fast, adaptable and easy to maintain

Typically operating at 11-15ms, Easergy Micom P740 enables fast fault trips. It can be adapted to any busbar configuration and operates with different types of CT. A high-speed fiber optic cable, which eliminates insulation-related problems, can be used for communications between the Central Unit and the Peripheral Units.

Fully communicant

With the availability of IEC61850-8-1 and IEC103 protocols, the Easergy Micom P740 is easily integrated in any substation system.

Latest communication protocols Ethernet Redundancy (available now in P741)

Fully Equipped with the latest communications protocols (IEC61850 Ed1 Ed2 available in the same device, selection by setting).
Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network Maintenance network)
Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Major enhancement to Cybersecurity (available soon, please contact your local representative for model availability)

Operational Cyber Security, compliant to IEC 62351, helps protect installations with security based on embedded features such as Role Based Access Control (RBAC), Port Hardening, Security Logs and Access Traceability. The IED by default includes RBAC with different users defined and a Security Administrator.

Benefits

• Fast fault trip (typically 11-15ms and 8ms with High Speed contacts option)
• Adaptable to any busbar configuration
• IEC61850-8.1 and IEC60870-5-103 communications
• Can operate with different types of CTs
• Programmable function keys hotkeys for fast access
• Flexible tri-colour LEDs
• Fibre optic intercommunication, ensures high communication speed, eliminating isolation problems

Product Details:

MiCOM P441, P442 and P444 are numerical, full-scheme distance relays that provide protection control and monitoring of transmission lines.

These numerical full-scheme relays provide flexible and reliable protection control and monitoring of transmission lines. They can be applied to high and extra-high voltage systems and operate extremely quickly and securely.

Proven algorithm basis for customized protection control
For use in high and extra-high voltage systems, this MiCOM relay family can be applied to a wide range of overhead lines and underground cables. Their functioning is based on a patented, proven algorithm with more than two decades of established field experience.

MiCOM P441, P442 and P444 offer unparalleled speed, security and selectivity all in one. Designed to protect and control any kind of power system fault, their wide range of communication options help in easily connecting them to any type of Digital Control System or SCADA.

InterMiCOM, an optional protection communication interface and a powerful programmable graphic scheme logic, enable users to develop customized protection schemes and solutions.

Fast, safe operations
Based on dual algorithms and polygonal characteristics, the MiCOM P441, P442 and P444 deliver fast operating times as low as 0..85 cycles. Offering a wide choice of channel-aided schemes, this MiCOM family provides Powerswing detection and Out-of-Step protection. Users may also choose from multiple communication protocols and interfaces options, including IEC61850.

Product Details:

The MiCOM P22x is a range of protection relays designed for motor protection applications. It includes a complete set of protection functions. Not only are they timesaving and cost-effective, but also reliable and increase motor efficiency.

Protection for motor current, voltage and temperature

MiCOM P22x performs a complete set of motor protection functions on current, voltage and temperature measurements. In addition to these basic functions, the relay carries out large number of other functions that enable it to protect and run the motor more effectively. System reliability is further enhanced via checks on bus voltage prior to start-up, supervision of trip-circuit wiring continuity and protection against circuit-breaker failure.

Functions against high inertia loads and anti-backspin ensure that the rotor stops before the motor can be re-started. The MiCOM P22x relay provides a true RMS based thermal image allowing efficient protection against overload phenomena due to the presence of harmonic components.

Comprehensive functions for a large range of applications

The MiCOM P22x series provides comprehensive protection functions for a large range of applications. It is available in both rack and compact design for optimized installation costs. MiCOM P22x improves monitoring conditions, reduces the need for documentation and training, and frees up users’ time.

Product Details:

The MiCOM P111 relays are suitable for all applications requiring over-current and/or earth-fault protection.

Due to its cost effectiveness and technical features, the MiCOM P111 relays can be used in both medium and low -voltage applications. Their user-friendly design provides a full set of easily accessible measurements.

MiCOM P111 can be used where communication facilities are required and their many features allow for easy adaptation to different applications and operational conditions.

MiCOM S1 setting software enables easy configuration and access to all measurements. In addition, MODBUS RTU communication protocol allows interfacing with substation control or the SCADA system. MiCOM P111 is housed in a small case for rail or rack mounting.

Cost competitive features enable full measurements
MiCOM P111 provides flexible current relay, a full set of measurements and a wide range of efficient features at a competitive price.

Product Details:

The MiCOM P63x series differential protection devices are designed for fast, selective, short-circuit protection of transformers, motors, generators and other installations.

Providing quick and selective differential protection, the MiCOM 63x is easily interfaced to almost any kind of substation control or SCADA system. It is user-friendly and provides clear readings from extensive recordings.

High-speed, three-system differential protection

MiCOM P63x provides high-speed three-system differential protection using a triple-slope characteristic and two high-set differential elements in combination with transformer inrush restraint, over fluxing restraint and through-stabilization.

By entering the nominal values of transformer windings and associated CTs, users obtain amplitude and vector group matching. The devices also incorporate many supplementary protective functions. MiCOM P63x provides four setting groups for easy adaptation to varying system operation conditions.

Systems versatility and easy, clear readings

Equipped with 1A/5A setting software, MiCOM P63x has two communication interfaces for SCADA and RTU, and numerous communication protocols. It allows easy and complete device settings and readings from extensive recordings. Available for flush or wall mounting, MiCOM P63x benefits from InterMiCOM interfacing for direct end-end communication between two protection devices.

Contractual warranty

Period : 2 years

Product Details:

MiCOM P12x offers a wide range of protection functions allowing its use in many applications including:

• Main or backup protection on MV/HV systems
• Overhead lines & underground cables, backup on HV systems.
• Insulated, solid earthed, resistance earthed, and Petersen coil earthed neutral systems
• MV subscribers, Industry, Transport
• Generator and Transformer schemes

Product Details:

The MiCOM P341 and P922G Interconnection Protection Relays offer the protection requirements necessary for operating machines in parallel with the main power supply network.

The MiCOM Interconnection relays can be customized to meet the specific needs of the intended application. They offer complete, cost-effective and highly reliable protection for operating machines.

The P341 also includes Dynamic Line Rating (DLR) protection to optimize transmission line capacity. Gains of 50% or more can be achieved, depending on the environmental conditions, enabling more Distributed Generation (DG) such as windfarms to be connected to the grid by taking into account the real time weather conditions to calculate the line rating compared to using the fixed summer/winter line ratings. DLR is a cost effective alternative to re-enforcing overhead lines to increase capacity and there are also benefits to the wind farm owner in that higher revenues can be made with a higher line rating.

Extensive multi-functions and user-friendly logic

This multi-function relay range ensures flexible, reliable integration of protection, control, monitoring and measurements for a wide variety of system applications. Users can create complex protection schemes via the MiCOM’s powerful, user-friendly logic.

In addition, a quality choice of industry standard protocols are available, facilitating integration into both new and existing network control systems.

Flexible communications and cost-effective solutions

This MiCOM relay family’s extensive protection functions meet the requirements for most interconnection and DLR protection applications and provide them with cost-effective solutions. It also offers flexible communications options.

Product Details:

The MiCOM generator protection relays provide flexible and reliable integration of protection, control, monitoring and measurement functions.

The wide range of functions offered in this range offer complete protection and control. Their flexibility results in cost-effective solutions for an extensive list of applications.

Product Details:

The MiCOM generator protection relays provide flexible and reliable integration of protection, control, monitoring and measurement functions.

The wide range of functions offered in this range offer complete protection and control. Their flexibility results in cost-effective solutions for an extensive list of applications.

Product Details:

Easergy MiCOM P746 has proven techniques and dynamic topology processing algorithms, offer a combination of security, speed and sensitivity.

Simple configuration for centralized architecture

The Easergy MiCOM P746 differential busbar protection provides a centralized one box or three boxes architecture and is very simple to use:

It does not need to be deeply engineered and supports easy operation and maintenance of the busbar.

Fast, secure and easy to use

With a typical operating time of 15 ms with High Break High Speed contact option or 19ms with standard contacts, the Easergy MiCOM P746protection is one of the fastest in its class.

Moreover, the trips can be synchronous or sequential, dynamically changing substation topology of the busbar is displayed on any PC with the substation real time dynamic monitoring tool.

Fully communicant

With IEC61850-8.1 Edition 1 or Edition 2, Courier, DNP3.0, Modbus and IEC103 protocols, the Easergy MiCOM P746 is easily integrated in any substation system.


Latest communication protocols Ethernet Redundancy

Fully Equipped with the latest communications protocols (IEC61850 Ed1 Ed2 available in the same device, selection by setting).
Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network Maintenance network)
Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Major enhancement to Cybersecurity

Operational Cyber Security, compliant to IEC 62351, helps protect installations with security based on embedded features such as Role Based Access Control (RBAC), Port Hardening, Security Logs and Access Traceability. The IED by default includes RBAC with different users defined and a Security Administrator.

Easergy MiCOM P746 REMOTE HMI PC APPLICATION SOFTWARE (Included in MiCOM S1 Studio User Software)
The Easergy MiCOM P746 remote PC HMI allows the user to display the Easergy MiCOM P746 Busbar topology, associated measured analogue quantities and DDB (digital data bus) status information such as circuit breaker and isolator positions and alarms.

Benefits

• Fast fault trip, Synchronous or Sequential trip
• Adapted to simple busbar configurations
• Can operate with different types of CT

 

Product Details:

MiCOM P115 are numerical relays designed to offer overcurrent and earth fault protection without requiring any external auxiliary supply. They can be applied to medium and high voltage electrical systems as either main or backup protection. MiCOM P115 can be ordered in self-powered or in a dual-powered version. P115 can be fully configured manually, without using of setting software. MiCOM S1 setting software allows via USB port to customize configuration parameters to specific application. The relay offers additional measurement, monitoring and recording function available via communication port A capacitance discharge output capable of putting out sufficient power to a low energy trip coil of circuit breaker An external flag indicator is used for remote or local indication that a trip has occurred Rear RS485 port allows to control of CB (with close and trip command). Housed in optional Flush or Wall mounting metal case, it can be easily adapted to various applications.

Application MiCOM P115 numerical overcurrent protection relays provide optimized and cost efficient solution where no external auxiliary power supply is available or guaranteed.
• Typical applications are:
• A cost optimized MV switchboard with small dimensions
• HV back up protection (HV/MV transformers)
• Utility and industrial substations
• Retrofit of old technology relays.

Product Details:

The MiCOM P22x protection relay range is designed for motor protection applications. A complete set of protection functions is performed on the measurement of current, voltage* and temperature. In addition to these basic functions, the relay carries out a large number of other functions that enable it to protect and run the motor more effectively. The reliability of the system is further enhanced via checks on bus voltage prior to start-up* during reacceleration, supervision of trip-circuit wiring continuity and protection against circuit-breaker failure. The MiCOM P22x protection relay range is particularly adapted to oil refinery, chemical plant, metallurgy, glass and cement manufacturing, paper mills, electrical and mechanical engineering, food production, mining etc. It is also suitable for water treatment and in pumping stations as well as in steam power plants. On top of that high inertia loads and anti-backspin protection ensures that the rotor stops before the motor can be re-started. For motors whose current supply contains a considerable degree of distortion, the relay provides a true RMS base thermal image allowing efficient protection against overload phenomena due to the presence of harmonic components. The addition of power measurement* and energy metering*, and the presence of analogue outputs (current loop) make the MiCOM P22x protection relay range a highly competitive and effective equipment in terms of protection. With latest upgrade P225 now can provide optional Ethernet communication with 2 RJ45 interfaces.

Product Details:

Features

<sup>MiCOM P821 is an Advanced Breaker Failure and protection relay based on the latest numerical technology.

MiCOM P821 provides enhanced protection due to the advanced numerical technology used in its design. It is highly reliable and flexible, and can be used with any application.</sup>

<sup>Wide monitoring capacities for maximum control


MiCOM P821 offers a range of protection functions, combined with extensive monitoring capacities, for optimum efficiency and maximum control of electrical schemes. An enhanced breaker failure protection function provides back up protection when the primary circuit fails to isolate the fault.

While this numerical relay is designed as a phase segregated detection device for EHV/HV/MV levels, it is also flexible enough for all voltage ranges and can be applied to any application.
The MiCOM P821 can use either single-stage breaker failure protection (tBF1) for back up protection to the local circuit breaker, or two-stage breaker failure protection (tBF1 tBF2).</sup>

<sup>Reliable detection, easy to program


MiCOM P821 ensures reliable phase segregated detection for 1/3 pole breaker tripping, and is suitable for all voltage levels. It also provides sensitive residual current detection and boast a fast RESET time. Equipped with one or two-stage CB failure, it is easy to program with the standard MiCOM Px20 setting procedure.</sup>

Product Details:

Easergy MiCOM P13x is a range of feeder management and One-Box solutions for flexible and comprehensive protection and control of feeders. Models available: Easergy MiCOM P132, Easergy MiCOM P139 and MiCOM P130C

Easergy MiCOM P132 offers a flexible and powerful device housed in a 4U case in 24TE, 40TE or 84TE width.  It provides a scalable solution to your needs, for hardware and software. Also includes optional detachable HMI for improved security and safety. Easergy MiCOM P132 offers Bay Control for up to 3 devices and a library of 80 pre-engineered templates to reduce engineering time.
Information exchange is performed by inbuilt communication interfaces, using either serial protocols (IEC 60870-5-101, -103, Courier, DNP or Modbus) or an Ethernet interface using IEC 61850.

In 40TE or 84TE, 4U case sizes, Easergy MiCOM P139 One-Box solution is the most advanced in the range, adding further protection functionality with a graphic LCD display and Bay Control for up to 10 devices, using a pre-engineered library of up to 300 templates.

MiCOM P130C offers a compact case feeder management device with configurable function keys, 17 LED indicators and communication functionality.

Benefits

 

Scalable solutions for advanced feeder protection and control

• Comprehensive and advanced range of protection functions, standardized, yet scalable to meet many system requirements.
• Flexible case mounting options suitable for wall, flush/panel or rack mounting.
• Modular hardware options for simple adaptation to any specific application requirements
• Advanced One-Box Solution and Bay Control 
• Detachable HMI for increased security and safety
• Available with IEC 61850 Communication (P132, P139)

Applications

Multifunctional feeder management relay enables the user to cover a wide range of applications in the protection of:

• Cables
• Overhead lines
• Transformers
• Motors

Product Details:

Easergy MiCOM P547 phase comparison protection provides unit protection of EHV and HV lines.

Easergy Micom P547 provides optimum protection for EHV and HV lines. With it fast fault clearance times, no external signaling and fully integrated back-up protection functions, it is a cost-effective and highly dependable protection solution.

Simple scheme, additional voltage inputs, fully-integrated back-up protection
Easergy Micom P547's simple protection principle and scheme enables fast fault clearance time. Interfacing with the Power Line Carrier equipment, which operates via the power line, means that the end-to-end scheme communication requires no external signaling channel.

VT inputs may be added to enhance protection stability and sensitivity in long line applications, and where single pole tripping is required. Adding voltage inputs supports distance protection and fault location, and enhances other Easergy Micom P547 functions.

Easergy Micom P547 is equipped with a complete range of fully integrated back-up protection, thereby improving reliability. It also includes sub-cycle distance elements so Easergy Micom P547 can be used in phase comparison scheme applications, for distance applications, or both simultaneously.

Fast fault clearance and no external signaling for cost-effective protection


Easergy Micom P547 provides highly selective unit protection and fast fault clearance times. The power line itself is the signaling medium, and users are not required to depend on VT signals for tripping. Equipped with back-up overcurrent protection, Easergy Micom P547 is a cost-effective alternative to current differential.

Product Details:

MiCOM P521 provides high speed, two ended current differential unit protection of overhead lines and underground cables in applications such as ring mains and parallel feeders. 

Micom P521 relay rprovides fast, efficient current differential protection. It is very flexible and can be applied to a wide range of power systems. Offering a variety of communications interface options, Micom P521 provides valuable local and remote back-up protection.

Multiple interface options and tripping for wide range of power systems


Ensuring optimum phase selection, Micom P521's many integrated protection functions allow for application to a wide range of power systems. It offers both local and remote back-up protection. Micom P521 also provides fast tripping results for an internal fault, and stability for any out-of-zone fault.

Its many interface options support metallic, direct fiber optic and multiplexed digital links. Tripping uses a proven characteristic comparing differential current with through current, enabling easier testing. Micom P521 includes a full range of integrated back-up protection, thereby enhancing reliability.

Highly selective unit protection and value added back-up protection

Micom P521 offers highly selective unit protection and a variety of end-to-end communications interface options. Its numerous integrated back-up elements can run as hot standby in the event of a communications channel outage.

Product Details:

The Easergy MiCOM 30 series rail devices are a series of protection relays dedicated to railway catenary protection. The Easergy MiCOM P138 specifically provides directional overcurrent protection for rail applications.

Features

Easergy Micom P138, with a proven record of providing comprehensive, efficient protection, can be applied to a wide range of applications. A user-friendly interface and several communication ports allows simple configuration. Highly flexible, Easergy Micom P138 can be customized to the user’s specific requirements.

Independent setting groups and simplified configuration

The Easergy Micom P138 enables a wide range of applications to protect supplies and catenaries in classic and autotransformer-fed (AT) systems. With easy connection to virtually all substation and catenary network management systems, it is enhanced by a complete range of backup protection and automation functions.

Four independent setting groups, with user-friendly control interface, store protection parameters and enable simple configuration to different operating conditions or alternative feeding. Extensive polling of information is also possible.

Easergy Micom P138 also features InterMiCOM teleprotection. Available in a modular design, it can be rack, flush panel or wall surface-mounted.

Flexibility and easy integration

User-friendly Easergy Micom P138is fitted with 1A/5A software setting, both supported in a single device, and two remote communication interfaces. It also benefits from InterMiCOM teleprotection interface. Users can customize the Easergy Micom P138 to their own applications, and its flexibility enables easy integration into various substation protective schemes.

Product Details:

Easergy MiCOM Px30 rail devices are a series of protection relays dedicated to railway catenary protection. The Easergy MiCOM P638 provides transformer differential protection.

Easergy Micom P638 has a proven record in providing comprehensive protection and can be applied to a wide range of applications. The user-friendly interface and several communication ports allows simple configuration and its flexibility means that it can be customized to the user’s requirements.

Four setting groups, simple configuration, extensive information polling

The Easergy Micom P638 enables a wide range of applications to protect supplies and catenaries in classic and autotransformer-fed (AT) systems. With easy connection to virtually all substation and catenary network management systems, Easergy Micom P638 is enhanced by a complete range of backup protection and automation functions.

Four independent setting groups, with user-friendly control interface, store protection parameters and enable simple configuration to different operating conditions or alternative feeding. Extensive polling of information is also possible.

Easergy Micom P638 also features InterMiCOM teleprotection, typically used to exchange binary information between line ends. With its modular design, the Easergy Micom P638 is available for rack, flush panel or wall surface mounting.

Flexibility and easy integration for customized applications

User-friendly Easergy Micom P638 is equipped with 1A/5A software setting, both supported in a single device, and two remote communication interfaces. It also benefits from InterMiCOM teleprotection interface. Users can customize the Easergy Micom P638 to their own applications. Highly flexible, it can be easily integrated within various substation protective schemes.

Product Details:

Easergy MiCOM 30 series rail devices are a series of protection relays dedicated to railway catenary protection. The Easergy MiCOM P436 provides catenary protection for classic and two-phase AT feeders.

Easergy Micom P436 and the Easergy Micom P438 have a proven record in providing comprehensive protection and can be applied to a wide range of applications. The user-friendly interface and several communication ports allows simple configuration, and its flexibility means that it can be customized to the user’s requirements.

Four setting groups, simple configuration, extensive information polling

The Easergy Micom P436 and the Easergy Micom P438 enable a wide range of applications to protect supplies and catenaries in classic and autotransformer-fed (AT) systems. With easy connection to virtually all substation and catenary network management systems, the two models are enhanced by a complete range of backup protection and automation functions.

Four independent setting groups, with user-friendly control interface, store protection parameters and enable simple configuration to different operating conditions or alternative feeding. Extensive polling of information is also possible.

Easergy Micom P436 and the Easergy  Micom P438 also feature InterMiCOM teleprotection. With their modular design, they are available for rack, flush panel or wall surface mounting.

Customization combined with easy integration

User-friendly Easergy Micom P436 and the Easergy  Micom P438 are fitted with 1A/5A software setting, supported in a single device, and two remote communication interfaces. It also benefits from InterMiCOM teleprotection interface. Users can customize them to their own applications. Highly flexible, they can be easily integrated within various substation protective schemes.

Product Details:

The MiCOM P521 relay provides high-speed two-ended current differential unit protection of overhead lines and underground cables in applications such as ring mains and parallel feeders. The integration of many protection functions allows application to a wide range of power systems, providing both local and remote backup protection. Optimum phase selection is assured, as the scheme measures the currents entering and leaving the protected plant zone. Fast tripping results for an internal fault, with stability for any out-of-zone fault The signalling interface options support metallic, direct fibre optic and multiplexed digital links. As digital communication is used, long distances between scheme ends can be achieved, and the signalling channel is monitored continuously. Tripping uses a proven characteristic comparing differential current with through current. Phase differential elements of this type offer consistent detection of solid and resistive faults, with optimum faulted phase selection, tripping, and indication. A full range of back-up protection is integrated. This enhances the dependability of the protection, as hot-standby elements such as overcurrent can be brought into service whenever a signalling channel outage may occur. With latest upgrade, MiCOM P521 now can provide the optional Ethernet communication with 2 RJ45 interfaces.

Product Details:

Easergy MiCOM P43x distance protection and One-Box devices are used for selective short circuit, ground fault and overload protection in all kinds of medium, high and extra-high voltage systems. Models available: Easergy MiCOM P433, Easergy MiCOM P435, Easergy MiCOM P437, Easergy MiCOM P439 and MiCOM P430C.

asergy MiCOM P43x offers a comprehensive range of protection functions as standard with optional hardware and software features available to satisfy your individual needs. Easergy MiCOM P439 One-Box solution also includes Bay Control up to 10 devices, including a library of more than 300 pre-engineered bay templates, to reduce your engineering time.
Information exchange is performed by inbuilt communication interfaces, using either serial protocols (IEC 60870-5-101, -103, Courier, DNP or Modbus) or an Ethernet interface using IEC 61850.

Easergy MiCOM P43x is scalable and available in modular 4U case sizes of 40TE or 84TE width, suitable for panel, rack or surface mounting. Wiring connections can be made with either ring or pin terminals, depending on preference and security. A detachable HMI is available to increase security and safety of local operation. Alternatively, it is also available in a Compact case MiCOM P430C, with reduced hardware functionality where mounting size is restricted.

BenefitsComprehensive, Modular Distance Protection

• Comprehensive and advanced range of protection and control functions suitable to meet many system requirements in Medium-, High,- and extreme high voltage systems
• Flexible modular hardware options for simple adaptation to application requirements
• Universal compact case which is equally suitable for wall or flush mounting.

ApplicationsMultifunctional distance device enables the user to cover a wide range of applications in protection and control of feeders:

• Overhead lines
• Cables

Product Details:

MiCOM C264 is the latest generation of modular substation computers for in input/output (I/O) management, communication gateway, measurement center or automation processor

Features

Schneider Electric offers flexible tools for the progressive retrofit of existing installations, as well as for new substations. Open platforms, relying on state-of-the-art technology, enable innovative automation scheme design and future-proof connectivity.

MiCOM C264 is the latest generation of modular substation computers. In addition to the traditional input/output (I/O) management, MiCOM C264 acts as a powerful communication gateway, an advanced measurement center and a fast automation processor.

As a remote terminal unit, bay controller or protocol converter, MiCOM C264 is the compact solution to countless applications installed in demanding electromagnetic conditions.

Standard Manufacturers Warranty: 1 year

Product Details:

MiCOM P9xx series of voltage and frequency relays are capable of highly versatile applications and are easily integrated into both new and existing network control systems. They offer improved power quality and are an ideal cost effective solution for maintaining system stability.

Versatile applications and enhanced techniques
Their application versatility and association of protection functions with automation, control and measurement make MiCOM P9xx an optimal, innovative solution for ensuring power system stability and maintenance reduction.

By employing enhanced techniques, designed to operate under non-linear abnormalities and sub-oscillations, MiCOM P9xx eliminates the risk of unwanted operations. With up to 30 output contacts, users can create simple or complex load and generation management schemes using the relay''s logic capabilities.

Integrated restoration facilities ensure that any disconnected loads are reconnected as soon as possible after system recovery. Industry standard communication protocols permit easier integration into both new and existing network control systems.

Product Details:

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose  and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Product Details:

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose  and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Product Details:

Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. They include Overcurrent, Earth/Ground Fault and complete protection, advanced communication and integrated functions for feeders. Easergy MiCOM P14x protection relays also offer function keys for integral scheme control functionality.

The following models are available:

• Easergy MiCOM P141 – Feeder management relay
• Easergy MiCOM P142 – Feeder management with integrated Autoreclose
• Easergy MiCOM P143 – Feeder management, integrated Autoreclose  and Check Synchronism
• Easergy MiCOM P145 – Feeder management, Autoreclose, Check Synchronism and Enhanced operator control functions

Housed in standard MiCOM 40TE, 60TE or 80TE, 4U case sizes, Easergy MiCOM relays offers a complete and scalable range of feeder protection, serial and Ethernet communications, including IEC61850 and a multi-language HMI featuring English, French, German, Spanish, Russian and Chinese.

Product Details:

MiCOM P211 relay is designed for motor supervision, protection and control applications.

MiCOM P211 is designed to offer a wide range of functions related to motor protection, supervision and control,  the Micom P211's flexibility makes it appropriate for use in medium or low-voltage applications.

Easily adaptable and equipped with MODBUS RTU protocol


Appropriate for use in both MV and LV applications, Micom P211 can be easily adapted to different applications and operational conditions. MiCOM S1 setting software facilitates even more by enabling easy configuration and access to all measurements.

MODBUS RTU protocol allows interfacing with substation control and SCADA systems. The relay is housed in a small case for rail or flush mounting.

A cost-efficient, flexible solution

Equipped with a range of quality features at a competitive price, the Micom P211 provides an efficient and flexible motor protection relay.

Product Details:

Easergy MiCOM P841 is a multifunctional line terminal IED for control and back-up protection in transmission and sub-transmission feeder bays.

• Easergy Micom P841 Model A for Single Breaker Applications with 16 Inputs and 14 Outputs
• Easergy Micom P841 Model B for Two Breaker Applications with 24 Inputs and 32 Outputs

Single or Three-phase auto-reclosing applications

Easergy Micom P841 Model A can be applied as a stand-alone solution for Auto-reclose and Check synch functionality for feeders controlled by a single circuit breaker.

Easergy Micom P841 Model B can be applied as a stand-alone solution for Auto-reclose and Check synch functionality for Dual circuit breakers applications such as ring bus/mesh corner formations and the breaker-and-a-half configurations.

Latest communication protocols Ethernet Redundancy (coming soon, please contact your local representative for model availability)
 

• Fully Equipped with the latest communications protocols (IEC61850 Ed1 Ed2 available in the same device, selection by setting).
• Maximum availability and reliability of Ethernet communications thanks to the implementation of PRP/HSR standard redundancy protocols with an instantaneous recovery time (0 ms) in case of network failure.
• Dual IP address allows the device to be connected to 2 independent communication networks (e.g, SCADA system network Maintenance network)
• Universal IRIG-B input (automatically detects modulated or unmodulated signal)

Benefits

• The logic capabilities of the Easergy MiCOM P841 products are extremely versatile, for instance managing leader-follower reclosing schemes in case of dual breaker applications.
• Transmission-class circuit breaker failure protection for one or two breakers. The breaker failure protection may be initiated from internal protection within the P841, and also from external devices.
• Single pole and three-pole breaker operation is supported, with independent supervision condition monitoring statistics for each pole
• Trip circuit supervision, control, and interlocking schemes can be designed in graphical support software.
• Multiple protection elements are provided, such as directional overcurrent, earth fault, voltage and frequency. This allows P841 to be deployed as a back-up IED in transmission applications, or as the Main 2 protection solution for sub-transmission systems.

Product Details:

The MiCOM P211 relay is made for motor application. It is designed for a wide range of protection, supervision and control functions relating to motor applications. Thanks to the many technical features and cost effi cient design, P211 can be used both in medium voltage and in low voltage applications, specifi cally where communication facilities are required. MiCOM P211 relay provides features for easy adaptation to different applications and operation conditions. The setting software MiCOM S1 Studio allows users an easy confi guration and access to all measurements. Modbus RTU communication protocol allows interfacing substation control or SCADA system. This MiCOM relay is housed in a small case for rail mounting (panel) or rack mounting.

Application:- The MiCOM P211 provides a wide range of protection functions for an asynchronous motor. Typical applications are:
• MV Industry, Transport
• Advanced LV application (specifi cally where communication facilities are required)
• Simple LV application For best cost effi ciency, several models of P211 enable you to tailor the device to your specifi c needs