Ruggedcom Ethernet Swithes SIEMENS-1

Product Details:

As the trend toward greater connectivity rapidly increases the number of network users, industrial networks are becoming increasingly more complex. This produces huge volumes of data – and it also offers enormous potential. Companies that want to fully utilize all the possibilities provided by digitalization in the age of Industrie 4.0 need an efficient Network Management System like SINEC NMS: Turning insights into outlooks.

Product Details:

The RX1500 series is a cost efficient utility grade Layer 2 and Layer 3 switch and router. The RX1500’s modular and field replaceable platform allows customers to select amongst WAN, serial and Ethernet options making it ideally suited for electric power utilities, the industrial plant floor, rail and traffic control systems.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Cyber Security Features

• Integrated Router/Firewall/VPN
• Stateful Firewall with NAT
• Full IPSec Virtual Private Networking
• VPN with 3DES, AES128, AES256 support
• RUGGEDCOM CROSSBOW for NERC CIP Cyber Security compliance
• RADIUS centralized password management
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC based port security
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security
• Optional Check Point Firewall and IPS (See RUGGEDCOM APE Module)

Protocols

• WAN
• Frame Relay RFC 1490 or RFC 1294
• PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication
• Multilink PPP RFC 1990
• GOOSE messaging Support
• IP
• Routing: OSPF, BGP, RIPv1 and 2
• VRRP
• Traffic control, NTP Server,
• IP Multicast Routing
• DCHP Agent (Option 82 Capable)
• MPLS

WAN Port Options

• T1/E1 (channd)
• E1 75 Ohms via BNC
• Cellular
• DDS

Frame Relay Support

• ISO and ITU compliant, network certified
• ANSI T1.617 Annex D, Q.933 or LMI Local Signaling

Management Tools

• Web-based, SSH, CLI management interfa ces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Product Details:

The RX1510 series is a compact, cost efficient utility grade Layer 2 and Layer 3 switch and router. The RX1510’s modular and field replaceable platform allows customers to select amongst WAN, serial and Ethernet options making it ideally suited for electric power utilities, the industrial plant floor, rail and traffic control systems.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Cyber Security Features

• Integrated Router/Firewall/VPN
• Stateful Firewall with NAT
• Full IPSec Virtual Private Networking
• VPN with 3DES, AES128, AES256 support
• RUGGEDCOM CROSSBOW for NERC CIP Cyber Security compliance
• RADIUS centralized password management
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC based port security
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security
• Optional Check Point Firewall and IPS (see RUGGEDCOM APE module)

Protocols

• WAN
• Frame Relay RFC 1490 or RFC 1294<
• PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication
• Multilink PPP RFC 1990
• GOOSE messaging Support
• IP
• Routing: OSPF, BGP, RIPv1 and 2
• VRRP
• Traffic control, NTP Server,
• IP Multicast Routing
• DCHP Agent (Option 82 Capable)
• MPLS

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and high voltage electrical transients
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable speed drive Systems)
• Exceeds IEC 61000-6-2 (generic industrial Environment)
• Exceeds NEMA TS-2 (traffic control Equipment)
• Exceeds EN 50155 and EN 50121-4 (railway)
• Meets IEC 60255-26 (protection equipment)
• -40°C to +85°C operating temperature (no fans)
• Failsafe Output Relay: For critical failure or error alarming

WAN Port Options

• T1/E1 (channelized)
• E1 75 Ohms via BNC
• Cellular
• DDS

Frame Relay Support

• ISO and ITU compliant, network certified
• ANSI T1.617 Annex D, Q.933 or LMI Local Signaling

Management Tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Product Details:

The RUGGEDCOM RSL910 VDSL modem offers the flexibility to use legacy copper or optical infrastructure in harsh environments with two EoVDSL2 uplinks and two SFP uplinks.

The RUGGEDCOM RSL910 is a rugged 10-port managed Ethernet switch which supports Ethernet over VDSL2 (EoVDSL2) and allows up to 2.9 km LAN segments over telephone-grade cable at up to 85 Mbps with optional SFP slots supporting Gigabit and Fast Ethernet.

The RUGGEDCOM RSL910 helps to achieve cost efficiency by making it possible for rail and road operators to reuse existing copper cabling and achieve broadband speeds between equipment cabinets. Legacy systems can thus be tapped to run modern Ethernet-based applications, which enable reliable, low latency connectivity to control centers.

It is also approved and certified for use in transportation applications (EN50121-4, EN50121-3, EN 45545-2 and NEMA TS2).

Product Details:

The RUGGEDCOM RS416 is a utility-grade serial device server with an integrated, fully managed Ethernet switch. It features a modular design that can support IEEE 1588 and IRIG-B time synchronization, up to 16 serial ports, and up to 4 Ethernet ports. As such, it can be used to interconnect and synchronize multiple types of intelligent electronic devices (IEDs).

RUGGEDCOM RS416P

The RUGGEDCOM RS416P is a utility-grade, serial device server with integrated, fully managed, 4-port Power-over-Ethernet (PoE) switch. With its modular design, it can support up to 16 serial ports and interconnect multiple types of intelligent electronic devices (IEDs) with varying methods of communication.

Cyber Security Features

• Multilevel user passwords secure switch against unauthorized configuration
• SSH/SSL – extends capability of password protection to add 128-bit encryption of passwords and data as they cross the network
• Enable/disable ports – capability to disable ports so that traffic cannot pass
• 802.1Q VLAN – provides the ability to logically segregate traffic between predefined ports on switches
• MAC-based port security – provides the ability to secure ports on a switch so only specific devices / MAC addresses can communicate via a port
• 802.1x port-based network access control – provides the ability to lock down ports on a switch so that only authorized clients can communicate via a port
• RADIUS – authentication service using MD5 hash and providing centralized password management
• SNMPv3 – encrypted authentication access security and data encryption (CBC- DES with 56-bit encryption key)
• Secure Socket Layer – Web-based management using SSL with data encryption (128-bit encryption key)
• RSA – 1,024-bit key for key management and key exchange
• TACACS+ – Terminal Access Control and Accounting Services Client provides encrypted authentication and authorization
• Point-to-Point Protocol (PPP) – using CHAP (MD5 Hash) authentication service
• SFTP – Secure File Transfer Protocol using SSH encryption

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges:

- Meets IEEE 1613 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• Fully independent 2kV (RMS) isolated serial ports
• Operating temperature: -40°C to +85°C (no fans)
• 18 AWG galvanized steel enclosure

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation and crossover detection
• Integrated cyber security features
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 MS)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies
• PoE power supply: 48 VDC

Product Details:

The RUGGEDCOM RX5000 integrated switch and router is a high-port-density Ethernet routing and switching platform designed to operate in harsh environments. This integrated switch and router can withstand high levels of electromagnetic interference, radio frequency interference, and a wide temperature range of –40°C to +85°C. This platform is designed to meet the challenging climatic and environmental demands found in utility, industrial, and military network applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ports Options

• Up to two 10 Gigabit uplinks
• Up to 24 Gigabit ports
• Up to 96 10/100TX copper ports
• Up to 48 100FX optical ports
• Long-haul optics allow distances up to 90 km
• Multiple connector types (ST, MTRJ, LC, SC)

Cybersecurity Features

• Integrated router/firewall/VPN
• Stateful firewall with NAT
• Full IPSec virtual private networking
• VPN with 3DES, AES128, AES256 support
• Substation Automation Software RUGGEDCOM CROSSBOW for NERC CIP cybersecurity compliance
• RADIUS centralized password management
• Multilevel passwords
• SSH/SSL encryption
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and high-voltage electrical transients
• Zero-Packet-Loss™ Technology
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable-speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial environment)
• Exceeds NEMA TS-2 (traffic control equipment)
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards (optional)

ROX™II Software Features

• Next generation of ROX™
• Layer 3 switching at wire speed
• Simple plug and play operation—automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• Traffic prioritization
• Transaction-based configuration with rollback
• GMRP and GMVP services
• Ethernet ports configurable for routed or switched operation
• Telecom style CLI

Management Tools

• Web-based, telecom standard CLI management interfaces
• SNMP v1/v2/v3
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms
• NETCONF
• Role-based access control

Universal Power Supply Options

• Fully integrated, dual-redundant (optional) power supplies
• Universal high voltage ranges: 88–300VDC or 85–264VAC
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to 85°C

Product Details:

The RX1510 series is a compact, cost efficient utility grade Layer 2 and Layer 3 switch and router. The RX1510’s modular and field replaceable platform allows customers to select amongst WAN, serial and Ethernet options making it ideally suited for electric power utilities, the industrial plant floor, rail and traffic control systems.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Cyber Security Features

• Integrated Router/Firewall/VPN
• Stateful Firewall with NAT
• Full IPSec Virtual Private Networking
• VPN with 3DES, AES128, AES256 support
• RUGGEDCOM CROSSBOW for NERC CIP Cyber Security compliance
• RADIUS centralized password management
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC based port security
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security
• Optional Check Point Firewall and IPS (see RUGGEDCOM APE module)

Protocols

• WAN
• Frame Relay RFC 1490 or RFC 1294<
• PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication
• Multilink PPP RFC 1990
• GOOSE messaging Support
• IP
• Routing: OSPF, BGP, RIPv1 and 2
• VRRP
• Traffic control, NTP Server,
• IP Multicast Routing
• DCHP Agent (Option 82 Capable)
• MPLS

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and high voltage electrical transients
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable speed drive Systems)
• Exceeds IEC 61000-6-2 (generic industrial Environment)
• Exceeds NEMA TS-2 (traffic control Equipment)
• Exceeds EN 50155 and EN 50121-4 (railway)
• Meets IEC 60255-26 (protection equipment)
• -40°C to +85°C operating temperature (no fans)
• Failsafe Output Relay: For critical failure or error alarming

WAN Port Options

• T1/E1 (channelized)
• E1 75 Ohms via BNC
• Cellular
• DDS

Frame Relay Support

• ISO and ITU compliant, network certified
• ANSI T1.617 Annex D, Q.933 or LMI Local Signaling

Management Tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Product Details:

The RUGGEDCOM RSG2100 is a utility-grade, fully managed, modular Ethernet switch. It is specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. With its superior rugged hardware design and embedded Rugged Operating System (ROS®), the RSG2100 provides improved system reliability along with advanced cyber security and networking features. As such, it is ideally suited for creating secure Ethernet networks for mission-critical, real-time control applications.

The RUGGEDCOM RSG2100P is a utility-grade, fully managed, modular Power-over-Ethernet (PoE) enabled Ethernet switch specifically designed for reliable operation in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2100P comes standard with 4 10/100BaseTX 802.3af (PoE) compliant Ethernet ports. It offers modular flexibility for up to 15 additional Ethernet ports, including 10BaseFL / 100BaseFX / 1000BaseX fiber and 10/100/1000BaseTX copper port combinations. The highly versatile RSG2100P can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density. It is an ideal solution to power and connect several Ethernet devices (e.g. IP phones, video cameras and wireless access points) where AC power is not available or cost-prohibitive to provide locally.

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges:

- Zero-Packet-Loss™ technology
- Meets IEEE 1613 Class 1 (electric utility substations) with copper ports or Class 2 with all fiber ports
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable-speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)

• Operating temperature: -40°C to +85°C (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous location certification: Class 1 Division 2

Cyber Security Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Operating System (ROS®) Features

• imple plug and play operation – automatic learning, negotiation and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 MS)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g. Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Product Details:

The RUGGEDCOM RSG2300/RSG2300P is a utility-grade, fully managed, 32-Port Managed Ethernet Switch with 4 Modular Gigabit Uplink Ports. The RSG2300''''s modular flexibility offers 10BaseFL /100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper port combinations.

The RUGGEDCOM RSG2300 is a utility-grade, fully managed, 32-Port managed Ethernet switch with 4 modular gigabit uplink ports. With its modular flexibility, the RSG2300 offers 10BaseFL /100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper port combinations. Optional front or rear mount connectors make the RSG2300 highly versatile and suitable for any application. It can support multiple fiber connectors (ST, MTRJ, LC, SC) without loss of port density.

The RUGGEDCOM RSG2300P is a utility-grade, fully managed, power-over-Ethernet (PoE) enabled, modular Ethernet switch. It is specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2300P comes standard with 2 10/100BaseTX 802.3af (PoE) compliant Ethernet ports, with the option to add an additional 2 PoE ports. It offers modular flexibility for up to 6 additional Ethernet ports, including 10BaseFL/100BaseFX/1000BaseX fiber and 10/100/1000BaseTX copper port combinations. The highly versatile RSG2300P can support multiple fiber types and connectors (ST, MTRJ, LC, SC) without loss of port density. It is an ideal solution to power and connect several Ethernet devices (e.g. IP phones, video cameras and wireless access points) where AC power is not available or cost-prohibitive to provide locally.

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges:

- Zero-Packet-Loss™ Technology - Meets IEEE 1613 Class 1 (electric utility substations) - Exceeds IEC 61850-3 (electric utility substations) - Exceeds IEC 61800-3 (variable-speed drive systems) - Exceeds IEC 61000-6-2 (generic industrial) - Exceeds NEMA TS-2 (traffic control equipment)

• Operating temperature: -40°C to +85°C (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous location certification: Class 1 Division 2

Cybersecurity Features

• Mutilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 MS)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g. Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Product Details:

The RUGGEDCOM RSG920P is a rugged, high density, small form factor Layer 2 switch with Power-over-Ethernet (PoE) capability, designed for space limited cabinets with high bandwidth requirements. Tested and certified to withstand extreme temperature, vibration and shock, the RUGGEDCOM RSG920P offers exceptional reliability for industrial applications such as transportation systems and oil and gas applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet ports

• 16 RJ45 Gigabit Ethernet ports
• 4 SFP Gigabit / Fast Ethernet slots
• 4 PoE ports supporting 802.3af / 802.3at with up 30 Watt/port

Cyber security

• Passwords – support for multiple access levels with separate credentials for each level
• SSH / SSL – extends capability of password protection to add encryption of passwords and data as they cross the network
• Enable / disable ports – capability to disable ports so unauthorized devices can’t connect to unused ports
• SNMPv3 – encrypted authentication and access security
• HTTPS – for secure access to the web interface
• 802.1x – to ensure only permitted devices can connect to the device
• MAC address authentication – control access to devices that do not support RADIUS

Additional features

• Digital input/output
• MicroSD card
• USB port for management

Power supply characteristics

• Supported input voltage ranges:

85 – 264 VAC / 100 – 300 VDC

• Power consumption: < 30 W
• PoE input voltage:

44 - 57 VDC (IEEE 802.3af), 50 – 57 VDC (IEEE 802.3at)

Accessories

• RUGGEDCOM RPS1300:

– Input voltage: 85 – 132 / 170 – 264 VAC
– Output voltage: 48 – 54 VDC
– Power Output: 140 Watt

• RUGGEDCOM SFP transceivers to cover various distances.

Approvals and certifications

• Safety:

– IEC 60950-1
– EN 60950-1
– CSA/UL 60950-1

• EMI:

– CISPR22
– EN55022
– FCC Part15 Class A

• EMC:

– IEC / EN 61000-6-2

• Transportation:

– NEMA TS-2

• Rail:

– EN 50121-4
– EN 50121-3-2
– EN 45545-2

• Oil & Gas:

IEC EX / ATEX (Ex nA IIC T4 Gc)
– EN 60079-0
– EN 60079-15

• NSA HazLoc (Cl. I, Div 2, Groups A-D) – CSA / ANSI 60079-0
  – CSA / ANSI 60079-15
  – CSA 213
  – CSA 142
  – ANSI / ISA 12.12.01
  – UL 916
• Vibration:

– IEC 60255-21-1, Class 2

• Shock:

– IEC 60255-21-2, Class 2

• Humidity:

– IEC 60068-2-30, up to 95% relative humidity

Product Details:

Combining Ethernet switching, wireless LAN, routing and firewall functionality in one, the RUGGEDCOM RX1400 holds its own in the most demanding industrial environments. As a cellular router, it eliminates the need for extensive communication infrastructures. In addition to providing IP40 protection, it requires no internal fans for cooling to operate reliably in an extended temperature range of -40Degree C to +85Degree C.

The RUGGEDCOM RX1400, thanks to its compact form factor and multi-function capability, offers a cost saving solution for large scale deployments by avoiding the need for multi-device solutions to achieve the needed interface, switching, routing and application hosting capabilities.

The RUGGEDCOM VPE1400 provides a virtualized environment to run a guest Linux operating system and third party applications on the RX1400, enabling intelligence at the network edge.

Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the RUGGEDCOM ROX II, using a Linux KVM (Kernel Virtual Machine) based solution. The KVM ensures that the guest OS and third party applications can run without impacting RUGGEDCOM RX1400 core services running on the system. The RUGGEDCOM RX1400 is an all-in-one solution for plug-and-play connectivity to MindSphere. This compact, single device solution provides the combined capabilities of data acquisition, conversion and communication with MindSphere.

Communication interfaces

• 2 SMA ports for Wireless WAN Interface (4G/3G/2G) with up to 100 Mbit/s bandwidth
• 4 x 10/100 Mbits/s ports (10/100TX)
• 2 x 1000 Mbit/s SFP ports (1000LX) for long reach fiber optic connections (up to 100 km)
• 2 Serial Ports RS232/RS422/RS485 (DB9)
• 2 R-SMA ports for Wireless LAN Interface supporting IEEE 802.11a/b/g/n with up to 100 Mbit/s bandwidth

Other interfaces

• SMA port for GPS
• RS232 console port for local management / diagnostics on the device
• Isolated built-in power input (12-24 VDC)

Rugged Rated for harsh environments

• -40 C to +85C operating temperature (no fans)
• CSA/UL 60950 safety approved to +85C

Management tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Software features

• Running ROX II Operating System
• Virtualization allows a full Linux image (with dedicated storage media and I/O ports) to run in parallel with the ROX II operating system.
• Enhanced security / reliability through data and control path separation
• Single file configuration automation ensures easy installation and configuration control
• Automatic rollback in the event of configuration errors
• NETCONF configuration interface supports powerful remote configuration and status features
• Port rate and Broadcast Storm Limiting
• Port configuration, status, statistics, mirroring
• Routing Protocols OSPF, BGP, RIPv1 and v2
• Virtual Router Redundancy Protocol (VRRP)
• NTP time synchronization (client and server)
• Redundancy protocols MSTP 802.1Q-2005, RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP) for network
• fault recovery
• Quality of service (802.1p) for real-time traffic

Product Details:

The WIN5200 is a broadband wireless subscriber unit, compliant with the IEEE 802.16e standard, with a built-in directional antenna for use in harsh environments. The WIN5200 greatly simplifies installation with LEDs for signal strength alignment, automatic connection to strongest serving base station and automated service provisioning, based on authentication credentials.Specifically designed for point-to-multipoint broadband wireless access applications, the WiN5200 provides efficient use of the wireless spectrum, supporting a range of applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Product Features & Specs

• Mobile-WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave 2 Profiles
• High Gain Integrated Antenna
• Excellent performance in NLOS conditions - overcoming multi path and deep fading, providing extended range and easy installation
• Automatic Transmit Power Control (ATPC) allowing for optimal network deployment, tight frequency reuse, and interference avoidance
• Numerous applications and services guaranteed voice, video and data services based on advanced QoS
• Low cost of ownership through simple installation and demand-based build-out, enabling operators to rapidly penetrate new market segments with minimal CAPEX
• Robust hardware supporting -40°C to +75°C operating temperature range
• Over one million hours mean time between failures (MTBF)
• Single cable Power over Ethernet (PoE)
• Wide frequency band support for deployments around the world

Product Details:

The RUGGEDCOM RS400 is a utility-grade, serial device server with an integrated, fully managed Ethernet switch, designed to operate reliably in electrically harsh and climatically demanding environments. Featuring an integrated 4-port serial server, a 4-port managed Ethernet switch, and an optional V.90 modem, the RS400 is able to interconnect multiple types of intelligent electronic devices (IEDs) that have different methods of communication. Using the RS400 results in fewer connectivity devices, reducing overall system costs, and also extends the useful life of existing legacy IEDs, minimizing capital expenditure for new equipment.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Integrated Ethernet switch – up to 4 ports
• High performance and throughput Ethernet switching
• Full IEEE 802.3x compliance
• Non-blocking, store and forward switching
• 10/100BaseTX, 10BaseFL, 100BaseFX options

Serial Device Server

• Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selectable) – DB9, RJ45, Phoenix style connectors
• Transmit serial data over an IP network
• Support for Modbus TCP, DNP 3, TIN serial protocols
• Baud rates up to 230 Kbps
• Point-to-point and multipoint modes
• Convert Modbus RTU to Modbus TCP
• Supports multiple Modbus masters

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges Meets IEEE 1613 (electric utility substations)
  Exceeds IEC 61850-3 (electric utility substations)
  Exceeds IEC 61800-3 (variable-speed drive systems)
  Exceeds IEC 61000-6-2 (generic industrial)
  Exceeds NEMA TS-2 (traffic control equipment)
• Fully independent 2kV (RMS) isolated serial ports
• 40°C to +85°C operating temperature (no fans)
• 18 AWG galvanized steel enclosure

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• Integrated secure management
• Fast network fault recovery (<5 ms) with eRSTP™
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies (no external adapters)
• Popular low voltage ranges: 24 VDC (10–36 VDC), 48 VDC (36–59 VDC)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• CSA/UL 60950 safety approved -40°to +85°C

Product Details:

The RUGGEDCOM RS401 is a utility-grade serial device server with an integrated, fully managed Ethernet switch, designed to operate reliably in harsh and climatically demanding environments. Based on the popular RUGGEDCOM RS400 server, the RUGGEDCOM RS401 includes all the same functionality, including an integrated 4-port serial server, 4-port managed Ethernet switch, and optional V.90 modem. In addition, the RS401 features a more compact design that is particularly suited for panel-mount locations or installations with tight space restrictions. The RS401 is an ideal device to connect and “IP-enable” legacy serial devices or IEDs for Ethernet network connectivity.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Integrated Ethernet switch – up to 4 ports
• High performance and throughput Ethernet switching
• Full IEEE 802.3, IEEE 802.3u, IEEE 802.3x compliance
• Non-blocking, store and forward switching
• 10/100BaseTX, 10BaseFL, 100BaseFX options

Serial Device Server

• Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selectable) – DB9, RJ45, Phoenix style connectors
• Transmit serial data over an IP network
• Support for Modbus TCP, DNP 3, TIN serial protocols
• Baud rates up to 230 Kbps
• Point-to-point and multipoint modes
• Convert Modbus RTU to Modbus TCP
• Supports multiple Modbus masters

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges Meets IEEE 1613 (electric utility substations)
  Exceeds IEC 61850-3 (electric utility substations)
  Exceeds IEC 61800-3 (variable-speed drive systems)
  Exceeds IEC 61000-6-2 (generic industrial)
  Exceeds NEMA TS-2 (traffic control equipment)
• Fully independent 2kV (RMS) isolated serial ports
• 40°C to +85°C operating temperature (no fans)
• 18 AWG galvanized steel enclosure

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• Integrated secure management
• Fast network fault recovery (<5 ms) with eRSTP™
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies (no external adapters)
• Popular low voltage ranges: 24 VDC (10–36 VDC), 48 VDC (36–59 VDC)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• CSA/UL 60950 safety approved -40°to +85°C

Product Details:

The RS910W family are wireless Ethernet switches which integrate IEEE 802.11b/g secure wireless LAN, with fully managed Ethernet switches and optional serial server functionality. With the installation of the RS900W series of wireless LAN products, a network designer will achieve the integration of wired and wireless networks. The RS900W product family can be configured as an access point, client, or bridge device.

Wireless Ethernet with integrated 8-port managed switch and 128-bit encryption.

Due to a change in regulations governing wireless testing and certification in Europe, the RS9xxW products can no longer be sold into European countries. For excellent Industrial Wireless LAN solutions that meet the latest regulations, please check out our SCALANCE W Industrial Wireless LAN portfolio.

Cyber Security Features

• WPA (Wi-Fi protected access) with TKIP for enhanced security and encryption
• WPA2/11i CCMP for robust security and 128-bit AES encryption
• IEEE 802.1X/RADIUS using EAP-PEAP for secure “enterprise class” authentication configuration
• Pre-shared key mode (PSK) for “personal” mode authentication configuration
• Multilevel user passwords
• SSH/SSL encryption (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Universal Power Supply Options

• Fully integrated power supply (no external adapters)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual low-voltage DC inputs: 24 VDC (10–36 VDC) or 48 VDC (36–72 VDC)
• Terminal blocks for reliable, maintenance¬-free connections
• CSA/UL 60950 safety approved to +85°C

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable-speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial)
• Exceeds NEMA TS-2 (traffic control equipment)
• –40°C to +85°C operating temperature (no fans)
• 20 AWG galvanized steel enclosure
• DIN or panel mounting options provide secure mechanical reliability
• Hazardous location certification: Class 1 Division 2

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP (802.1Q-2005, formerly 802.1s)
• RSTP (802.1D-2004) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)

Product Details:

The RX1510 series is a compact, cost efficient utility grade Layer 2 and Layer 3 switch and router. The RX1510’s modular and field replaceable platform allows customers to select amongst WAN, serial and Ethernet options making it ideally suited for electric power utilities, the industrial plant floor, rail and traffic control systems.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Cyber Security Features

• Integrated Router/Firewall/VPN
• Stateful Firewall with NAT
• Full IPSec Virtual Private Networking
• VPN with 3DES, AES128, AES256 support
• RUGGEDCOM CROSSBOW for NERC CIP Cyber Security compliance
• RADIUS centralized password management
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC based port security
• VLAN (802.1Q) to segregate and secure network traffic
• SNMPv3 encrypted authentication and access security
• Optional Check Point Firewall and IPS (see RUGGEDCOM APE module)

Protocols

• WAN
• Frame Relay RFC 1490 or RFC 1294<
• PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication
• Multilink PPP RFC 1990
• GOOSE messaging Support
• IP
• Routing: OSPF, BGP, RIPv1 and 2
• VRRP
• Traffic control, NTP Server,
• IP Multicast Routing
• DCHP Agent (Option 82 Capable)
• MPLS

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and high voltage electrical transients
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEC 61800-3 (variable speed drive Systems)
• Exceeds IEC 61000-6-2 (generic industrial Environment)
• Exceeds NEMA TS-2 (traffic control Equipment)
• Exceeds EN 50155 and EN 50121-4 (railway)
• Meets IEC 60255-26 (protection equipment)
• -40°C to +85°C operating temperature (no fans)
• Failsafe Output Relay: For critical failure or error alarming

WAN Port Options

• T1/E1 (channelized)
• E1 75 Ohms via BNC
• Cellular
• DDS

Frame Relay Support

• ISO and ITU compliant, network certified
• ANSI T1.617 Annex D, Q.933 or LMI Local Signaling

Management Tools

• Web-based, SSH, CLI management interfaces
• SNMP v1/v2/v3
• Remote Syslog
• Rich set of diagnostics with logging and alarms
• Loopback diagnostic tests
• Raw and interpreted real time line traces

Product Details:

The RUGGEDCOM RP100 is a single port 802.3at Power-over-Ethernet injector that provides the flexibility to power remote PoE devices using standard Cat 5 cable. Compatible with the latest 802.3at high-power PoE standard and backward compatible with low-power 802.3af PoE devices, the RP100 provides versatility and investment protection to handle future demands for increased power.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Unmatched Reliability

• The RP100 provides stability and performance under high levels of temperature variation, EMI stress, and voltage fluctuation that occur in electrical and industrial applications.
• Rugged Rated, –40°C to +85°C temperature rating
• IEEE 1613 and IEC 61850-3 compliance means continued operation in harsh environments

Network Design Flexibility

• The RP100 is a configuration-free plug and play device suitable for any Power over Ethernet connection, supporting both IEEE 802.3af and 802.3at Power over Ethernet standards in one box.
• Supports a wide range of AC and DC input voltages
• Space-saving compact design with DIN rail or panel mount
• Reduces cabling, connection, and power supply requirements for PoE devices

Safety and Performance

• The RP100 has the same certifications as protection and control devices providing the confidence and assurance of continued operation even in the worse conditions.
• Automatic detection of remote power devices
• Output fault protection
• -40°C to +85°C temperature rating

Substation Rated:

• IEC 61850-3
• IEEE 1613
• –40°C to +85°C operating temperature range (no fans)

Industrial Design:

• Panel or DIN mounting
• Lightweight cast aluminum enclosure
• LED indicators for link, activity, and speeds aid in field troubleshooting

Performance:

• Configuration-free, plug and play operation
• 802.3at/af-compliant or RM version for connection to RUGGEDCOM WIN products

Product Details:

The RUGGEDCOM RP110 provides the flexibility to power remote PoE devices using standard Cat 5 cable. Converging data and power onto a single cable saves costs, space, and labor for new and existing installations. In addition to a power injector, the RP110 has a built-in serial server, designed to bridge legacy serial devices onto an IP network. It offers a single interface capable of supporting RS422, 485, and 232 protocols, and is protocol aware for certain common serial protocols such as DNP and Modbus.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Unmatched Reliability

• The RP110 provides stability and performance under high levels of temperature variation, EMI stress, and voltage fluctuation that occur in electrical and industrial applications.
• Rugged Rated, –40°C to +85°C temperature rating
• IEEE 1613 and IEC 61850-3 compliance means continued operation in harsh environments

Network Design Flexibility

• The RP110 is a configuration-free plug and play device suitable for any Power over Ethernet connection to a RUGGEDCOM WIN subscriber unit.
• Supports a wide range of AC and DC input voltages
• Space-saving compact design with DIN rail or panel mount
• Reduces cabling, connection, and power supply requirements for PoE devices

Safety and Performance

• The RP110 has the same certifications as protection and control devices providing the confidence and assurance of continued operation even in the worse conditions.
• Automatic detection of remote power devices
• Output fault protection
• -40°C to +85°C temperature rating

Substation Rated:

• IEC 61850-3
• IEEE 1613
• –40°C to +85°C operating temperature range (no fans)

Industrial Design:

• Panel or DIN mounting
• Lightweight cast aluminum enclosure
• LED indicators for link, activity, and speeds aid in field troubleshooting

Performance:

• Configuration-free, plug and play operation
• RM version for connection to RUGGEDCOM WIN products

Rugged Operating System (ROS©)

• The RP110 includes a subset of the features of the industry leading ROS© operating system, including:
• Remote management and logging
• Serial IP encapsulation
• SNMP based network management
• Precision timing support

The RUGGEDCOM accessories portfolio includes a wide range of Fast Ethernet small form-factor pluggable (SFP) transceivers for select RUGGEDCOM routers and switches.

These convenient and cost-effective SFP transceivers offer a variety of speed, distance and interface options for extending the reach and functionality of networks. RUGGEDCOM SFPs are available for 10 GBit/s, 1 GBit/s and Fast Ethernet, and cover distances ranging from 0 – 115 km, depending on the SFP specification.

The RUGGEDCOM M2200 switch is a 9-port, MIL-STD fully managed, modular Ethernet switch, specifically designed to operate reliably in harsh environments. The M2200’s superior rugged hardware design, coupled with the embedded Rugged Operating System (ROS®), provides improved system reliability and advanced cybersecurity and networking features, making it ideally suited for creating secure Ethernet networks for mission-critical, real-time control applications.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports M2100

• Up to 9 Gigabit Ethernet ports copper and/or fiber
• 2 port modules for tremendous flexibility
• Supports multimode and single-mode fiber
• Non-blocking, store and forward switching
• Supports LC connectors for fiber, Micro-D connectors for copper

Cybersecurity Features

• Multilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Zero-Packet-Loss™ technology
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards
• 18 AWG galvanized steel enclosure

MIL-STD Ratings

• MIL-STD 901D – shock (hard mounted)
• MIL-STD 167 – vibration
• MIL-STD 461 – EMI
• MIL-STD 1399 – magnetic field (DC magnetic exposure)
• MIL-STD 810 – temperature and humidity

Rugged Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Industrial automation features (e.g., Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Popular low-voltage ranges: 24 VDC(10–36 VDC), 48 VDC (36–72 VDC)
• Screw or pluggable terminal blocks available
• Terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950 safety approved to +85°C

The RUGGEDCOM M969 switch is a MIL-STD, fully managed Ethernet switch, providing dual fiber optical Ethernet ports and eight Fast Ethernet copper ports in a MIL-STD 901D-rated package (for protection against vibration and shock impacts). It is IP66/IP67 rated for protection against strong jets of water (IP66) and temporary immersion in water (IP67).

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Ethernet Ports

• Fiber optical Ethernet ports (100BaseX and 1000BaseX) with IP66/IP67-rated fiber optical connectors (type LC)
• 8 fast Ethernet ports (10/100BaseTX) with IP66/IP67-rated M12 D-code connectors or IP66/IP67-rated shrouded RJ45-style connectors

Cybersecurity

• Multilevel user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 authentication and 56-bit encryption

Rugged Rated for Reliability in Harsh Environments

• MIL-S 901D Shock
• IP67 rated for protection against immersion in water
• IP66 rated for protection against strong jets of water
• Immunity to EMI and heavy electrical surges
• Hazardous location certification: Class 1 Division 2
• –40°C to +85°C operating temperature (no fans)
• Conformal coated printed circuit boards

RUGGEDCOM Operating System (ROS®) Features

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• MSTP 802.1Q-2005 (formerly 802.1s)
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP™) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation (802.3ad)
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• Industrial automation features (e.g., Modbus)

Management Tools

• Web-based, Telnet, CLI management interfaces
• SNMP v1/v2/v3 (56-bit encryption)
• Remote monitoring (RMON)
• Rich set of diagnostics with logging and alarms

Universal Power Supply Options

• Fully integrated power supplies (no external adapters)
• Popular low-voltage ranges: 24 VDC (10–36 VDC), 48 VDC (36–59 VDC)
• Universal high-voltage range: 88–300 VDC or 85–264 VAC
• Dual-redundant, parallel load-sharing power supplies (optional)
• Powered from different sources
• Available with M23-style connectors
• CSA/UL 60950 safety approved to +85°C

Product Details:

The RUGGEDCOM WIN7000 is a high power, broadband wireless base station, compliant to the IEEE 802.16e standard, designed for long range deployments in licensed frequency bands in harsh environments. Available in a number of different frequency bands, the WIN7000 has been designed around delivering maximum coverage where regulations permit high power operation. The single sector design can accomodate as many sectors as required at a given site, driven by coverage, bandwidth and subscriber considerations.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Product Features & Specs

• Mobile WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave2 (MIMO) certification.
• Support of worldwide WiMAX deployments in the 1.X, 2.X and 3.X GHz bands.
• Felxible configurations: Single cable power and Ethernet or Fiber Optic interface.
• Rated for harsh environments: IEEE 1613, IEC 61850-3, Class 1 Div 2 / ATEX Zone 2, MIL-STD 810F, 509.4 - salt fog.
• Long range: Transmit and receive diversity combined with high power for improved reach and NLOS performance.
• High bandwidth: RUGGEDCOM WIN has two built-in radios operating on the same frequency simultaneously (MIMO) to increase bandwidth (up to 40Mbps) and spectral efficiency.
• Lowest frequency use: Leverages OFDMA and built in GPS to enable users to deploy an entire network on a single frequency channel.
• Usage models: Designed to support long range connections to fixed, portable and mobile end points, supporting vehicular speed seamless mobility and backhaul mode.
• Quality of service: RUGGEDCOM WIN gives the user the ability to separate traffic types over the air and guarantee latency, minimum bandwidth and jitter according to application needs.
• Rugged form factor: RUGGEDCOM WIN is an all outdoor rugged form factor enabling flexible deployment options. RUGGEDCOM products are designed for use in harsh environments such as those found in electrical power substations, oil refineries, military applications, roadside traffic control cabinets and metals and minerals processing.
• Standalone architecture: Commercial broadband wireless equipment requires an entire network infrastructure to be in place including a specialized mobile router called an ASN gateway, which acts as a central point for all network traffic. This infrastructure can be very costly and complex to implement. Siemens has developed a mode which does require this heavy infrastructure but maintains the interoperability and technology advances of broadband wireless.
• More secure: RUGGEDCOM WIN has many built-in features to ensure NERC CIP compliance such as two factor mutual authentication, AES encryption and message integrity protection using CMAC.

Product Details:

The RUGGEDCOM MX5000 enclosure is a tough, welded-aluminum, hard mount enclosure, available as an off-the-shelf replacement enclosure for the RUGGEDCOM MX5000RE.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Product Features

• Welded-aluminum extrusion construction
• Welded-aluminum mounting brackets for MIL901D hard mounting
• Configurable patch panel allows up to 64 MIL-grade circular connectors for both copper and fiber media
• Integrated cable management for strain relief
• Removable front panel with EMI glass for service and maintenance
• Hard-mounted brackets fit standard 19" rack-mount equipment
• Dual internal MIL-grade high-reliability fans minimize internal temperature gradient with no outside air exchange
• IEC 60529 IP65 rated dust tight, water jets

Product Details:

The RUGGEDCOM MX5000RE is an MX5000 pre-installed and cabled within the RUGGEDCOM RX5000 enclosure.

The RUGGEDCOM-Selector lets you configure RUGGEDCOM products quickly, easily, and efficiently, by using targeted navigation through selection menus or by entering item numbers. Selected products can then be ordered directly by transferring the parts list into the Industry Mall.

Product Features

The RUGGEDCOM RX5000 enclosure is a tough aluminum enclosure built to improve the MX5000’s already impressive shock and vibration performance and even further reduce, the already low, electronic emissions from the MX5000. The RUGGEDCOM RX5000 enclosure uses EMI glass and provides a patch panel with EMI gaskets to keep emissions at a minimum. This hard mounted enclosure is one of many advanced networking solutions from Siemens, designed specifically for harsh environments, such as can be found in military applications.

Product Details:

RUGGEDCOM CROSSBOW

A global standard in Secure Access Management systems

A cybersecurity solution, RUGGEDCOM CROSSBOW is compliant with multiple cybersecurity standards including the NERC CIP.

Designed to be intuitive enough to be operated by large numbers of personnel, RUGGEDCOM CROSSBOW offers a new standard in security when it comes to local or remote user NERC CIP (North American Electric Reliability Corporation critical infrastructure protection) compliant access to field IEDs.

Comprehensive and scalable with a seamless configuration environment, this software solution lets users securely access field IEDs for remote maintenance, configuration and data retrieval – thus meeting the needs of industrial and utility asset owners.

A cybersecurity solution, RUGGEDCOM CROSSBOW also forms an essential part of the RUGGEDCOM integrated cybersecurity approach. 

Product Details:

RUGGEDCOM ELAN solves a wide range of communications and data integration issues, from the substation to the control center and into the enterprise. The RUGGEDCOM ELAN family of products is based on the Linux operating system and includes the Substation Communications Server, Universal DNP Gateway , Remote Interface Gateway, and Front End Processor. Each product is focused on a specific application within the utility’s communication infrastructure. The central benefit of using RUGGEDCOM ELAN solutions is that a broad range of users within the utility are given secure access to the IED information that they require, made available in a format they understand, whenever they need it. When used with other RUGGEDCOM applications for secure remote access and data presentation and analysis, the user benefits from ease of integration and implementation.
Substation Communications Server
RUGGEDCOM ELAN SCS typically resides in the substation and has a direct connection to all IEDs. It provides a single point of access to these devices, over a Wide Area Network (WAN) or modem connection. The strength of the RUGGEDCOM ELAN SCS lies in its ability to support multiple, concurrent host interfaces; each getting the specific data it needs. For example, from a particular relay, SCADA data may be sent to the EMS, using a SCADA protocol; a different subset of data may go to a historian and fault files may be automatically extracted and distributed to interested users.
Deployed in the substation, the ELAN SCS provides the following functionality:

• Open, flexible access to all substation and distribution devices, from any authorized user or application
• Preserves investment in legacy devices and control centre applications
• Protocol conversion/normalization and data concentration
• Automated retrieval of fault file data (sometimes called non-operational data)
• Powerful automation processor
• Reliable extraction/presentation of relay target data
• May run on the RX1500 RUGGEDCOM APE Module, eliminating the need for additional substation computers

Universal DNP Gateway

RUGGEDCOM ELAN UDG is based on the robust, flexible Linux architecture, and is available on a variety of diskless hardware platforms, and I/O configurations.

· The ELAN UDG can be deployed in any area from the control center to the substation for smaller systems (<25 devices). The ELAN UDG provides the following functionality:
Flexible, high performance protocol routing (DNP3, IEC 870-5-104)

· Device level configuration

· Address masquerading

• Protocol conversion/normalization and data concentration
• Multi-master support
• Can be Integrated with RX1500 series ROX2 operating system, eliminating the need for additional substation computers

Remote Interface Gateway
RUGGEDCOM ELAN RIG provides the UDG functionality in a secure DNP environment with support for SSL/TLS connections.
Front End Processor

• RUGGEDCOM ELAN Front-End Processor (FEP) is based on the field-proven TIE (Telemetry Integration Environment) module, which was originally developed as the telemetry front end for a major EMS vendor and is currently installed in over 50 utilities worldwide.

Product Details:

RUGGEDCOM REFLEX substation HMI is a purpose built solution for local and remote monitoring and controlling all aspects of substation operations. Whether you need support for users local or remote, Reflex makes information available through the following ready to deploy features:

• Single Line diagram with rich graphics editor
• Multiple protocol support
• Faceplate emulation of many IEDs
• Alarm acknowledgement and summary
• Sequence of events summary
• Graphical trending of values
• Extensive reporting facility
• Historian option to record years of information

Custom screens and applications can also be quickly developed using the RUGGEDCOM REFLEX’s advanced scripting language.

Getting your data, all of it

• RUGGEDCOM REFLEX device interface library is large, with more than 50 protocol interfaces that allow you to get to data from decades old RTUs as well as the latest 61850-based IEDs. REFLEX can also be combined with the RUGGEDOM ELAN Substation Communications Server to extend data visualization to include non-operational data and enhance reliability by partitioning the data acquisition and visualization functions.:
• With its SQL-based architecture, REFLEX goes well beyond the substation as well to incorporate enterprise information from disparate databases. Configuring the system is simple, with templating and automatic population of data lists for certain devices types.