FO converter with LC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function. Comprehensive link diagnostics. DIN rail mountable, 12 ... 57 V DC supply. Meets IEC 61850-3 and IEEE 1613 standards.
Technical data
Utilization restriction : EMC: class A product, see manufacturer's declaration in the download area
Dimensions
Width : 30 mm
Height : 130 mm
Depth : 100 mm
Ambient conditions
Ambient temperature (operation) : -40 °C ... 75 °C
FO converters - FL MC 2000E LC - 2891056
Technical data
Ambient conditions
Ambient temperature (storage/transport) : -40 °C ... 85 °C
Permissible humidity (operation) : 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) : 5 % ... 95 % (non-condensing)
Altitude : 4850 m
Degree of protection : IP20
Noise immunity : IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005
General
Electrical isolation : VCC // FE // Ethernet
Latency : 700 ns (Pass-through mode, 100 Mbps, static)
Test voltage data interface/power supply : 500 V DC
Electromagnetic compatibility : Conformance with EMC Directive 2004/108/EC
Noise emission : EN 61000-6-4
Mounting position: On horizontal DIN rail NS 35 in acc. with EN 60715
Net weight : 315 g
Housing material : Aluminum
UL, USA/Canada : Class I, Div. 2, Groups A, B, C, D
Power supply
Nominal supply voltage : 24 V DC, 48 V DC
Supply voltage range : 12 V DC ... 57 V DC
Typical current consumption: 110 mA (24 V DC)
Connection method :Plug-in screw terminal block (COMBICON), redundancy possible
Conductor cross section flexible max. : 2.50 mm²
Conductor cross section flexible min. : 0.20 mm²
Conductor cross section solid max. : 2.50 mm²
Conductor cross section solid min. : 0.20 mm²
Max. AWG conductor cross section, flexible : 12
Min. AWG conductor cross section, flexible : 24
Conductor cross section AWG max. : 12
Conductor cross section AWG min. : 24
Serial interface
Interface 1 : Ethernet interface, 100Base-Tx in acc. with IEEE 802.3u
Connection method : RJ45 socket, shielded
Transmission medium : Copper
Transmission length : 100 m (twisted pair, shielded)
Link through : Link fault pass through
MDI-/MDI-X switchover : Auto-MDI(X)
Signal LEDs : LNK/ACT, 100
Data flow control/protocols : IEC 61850-3, IEEE 1613
Additional Information:
Rack-mount managed Ethernet switch meets IEC 61850-3 and IEEE 1613. Provides 24 RJ45 ports at
10/100 Mbps and four gigabit combo ports (10/100/1000 Mbps RJ45 connection; 1000 Mbps fiber optic
connection requires 1000 Mbps SFP module)
· Network structure according to IEC 61850
·EEthernet IEC 61850-3
Technical data
Utilization restriction : EMC: class A product, see manufacturer''s declaration in the download area
Dimensions
Width : 442 mm
Height : 44 mm
Depth: 375 mm
Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -40 °C ... 70 °C
Ambient temperature (storage/transport): -40 °C ... 85 °C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Air pressure (operation) : 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Industrial Ethernet Switch - FL SWITCH 4824E-4GC - 2891072
Technical data
Air pressure (storage/transport) : 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Interfaces
Interface 1 : Ethernet (RJ45)
No. of ports : 24 (RJ45 ports)
Connection method : RJ45
Note on connection method : Auto negotiation and autocrossing
Transmission physics : Ethernet in RJ45 twisted pair
Transmission speed : 10/100 Mbps
Transmission length : 100 m
Interface 3 : Ethernet (RJ45/FO combo)
No. of ports : 4
Connection method : Combo
Note on connection method : Auto negotiation and autocrossing (RJ45 interface)
Transmission physics : Ethernet RJ45 (10/100/1000 Mbps) or SFP (1000 Mbps)
Transmission speed : 10/100/1000 Mbps
Function
Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Network expansion parameters
Cascading depth : Network, linear, and star structure: any
Maximum conductor length (twisted pair) : 100 m
Supply voltage
Current consumption: 359 mA (115 V AC from FL SWITCH 4800E-P5)
Inrush surge current : 18.8 A (48 V DC from FL SWITCH 4800E-P1)
General
Mounting type Rack mount, includes brackets
Type AX : Block design
Net weight : 4470 g
Standards and Regulations
Type of test: Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result: 30g, 11 ms half-sine shock pulse
Type of test: Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result: 5g, 150 Hz, Criterion 3
Noise emission: EN 61000-6-4
Noise immunity: IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005
Additional Information:
Rack-mount managed Ethernet switch meets IEC 61850-3 and IEEE 1613. Provides eight RJ45 ports at
10/100 Mbps, 16 LC MM fiber ports at 100 Mbps and four gigabit combo ports (10/100/1000 Mbps RJ45
connection; 1000 Mbps fiber optic connection requires 1000 Mbps SFP module).
· Network structure according to IEC 61850
· IEEE 1613
Technical data
Utilization restriction : EMC: class A product, see manufacturer''s declaration in the download area
Dimensions
Width : 442 mm
Height : 44 mm
Depth : 375 mm
Ambient conditions
Degree of protection : IP20
Ambient temperature (operation) : -40 °C ... 70 °C
Ambient temperature (storage/transport) : -40 °C ... 85 °C
Permissible humidity (operation) : 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) : 5 % ... 95 % (non-condensing)
Air pressure (operation) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Industrial Ethernet Switch - FL SWITCH 4808E-16FX LC-4GC - 2891073
Technical data
Ambient conditions
Air pressure (storage/transport) : 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Interfaces
Interface 1 : Ethernet (RJ45)
No. of ports : 8 (RJ45 ports)
Connection method : RJ45
Transmission physics : Ethernet in RJ45 twisted pair
Transmission speed : 10/100 Mbps
Transmission length : 100 m
Interface 2 : Fiber optic interface
No. of ports : 16 (Multi mode)
Connection method : LC
Transmission physics : multi-mode fiberglass
Transmission speed : 100 Mbps (Full duplex)
Transmission length : 8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
3.3 km (fiberglass with F-G 62.5/125 2.6 dB/km F600), 9.6 km (fiberglass with F-G 50/125 0.7 dB/km F1200)
5.3 km (fiberglass with F-G 50/125 1.6 dB/km F800)
Wavelength : 1300/1310 nm
Interface 3 : Ethernet (RJ45/FO combo)
No. of ports : 4
Connection method : Combo
Transmission physics : Ethernet RJ45 (10/100/1000 Mbps) or SFP (1000 Mbps)
Transmission speed : 10/100/1000 Mbps
Function
Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts.
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Network expansion parameters
Cascading depth: Network, linear, and star structure: any
Maximum conductor length (twisted pair) : 100 m
Supply voltage
Current consumption: 553 mA (115 V AC from FL SWITCH 4800E-P5)
Inrush surge current: 19 A (48 V DC from FL SWITCH 4800E-P1)
Additional Information:
Rack-mount managed Ethernet switch meets IEC 61850-3 and IEEE 1613. Provides eight RJ45 ports at
10/100 Mbps, 16 ST MM fiber ports at 100 Mbps and four gigabit combo ports (10/100/1000 Mbps RJ45
connection; 1000 Mbps fiber optic connection requires 1000 Mbps SFP module).
· Network structure according to IEC 61850
· IEEE 1613
Technical data
Utilization restriction EMC: class A product, see manufacturer''s declaration in the download area
Dimensions
Width: 442 mm
Height: 44 mm
Depth: 375 mm
Ambient conditions
Degree of protection:IP20
Ambient temperature (operation): -40 °C ... 70 °C
Ambient temperature (storage/transport): -40 °C ... 85 °C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Air pressure (operation) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Industrial Ethernet Switch - FL SWITCH 4808E-16FX ST-4GC - 2891085
Technical data
Air pressure (storage/transport): 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Interfaces
Interface 1:Ethernet (RJ45)
No. of ports: 8 (RJ45 ports)
Connection method: RJ45
Note on the connection method: Auto negotiation and autocrossing
Transmission physics:Ethernet in RJ45 twisted pair
Transmission speed: 10/100 Mbps
Transmission length: 100 m
Interface 2: Fiber optic interface
No. of ports: 16 (Multi mode)
Connection method: ST
Transmission physics: multi-mode fiberglass
Transmission speed: 100 Mbps (Full duplex)
Transmission length: 8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000), 3.3 km (fiberglass with F-G 62.5/125 2.6 dB/km F600). 9.6 km (fiberglass with F-G 50/125 0.7 dB/km F1200), 5.3 km (fiberglass with F-G 50/125 1.6 dB/km F800)
Wavelength: 1300/1310 nm
Interface 3: Ethernet (RJ45/FO combo)
No. of ports: 4
Connection method: Combo
Note on the connection method Auto negotiation and autocrossing (RJ45 interface)
Transmission physics: Ethernet RJ45 (10/100/1000 Mbps) or SFP (1000 Mbps)
Transmission speed: 10/100/1000 Mbps
Function
Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), link and activity per port
Network expansion parameters
Cascading depth: Network, linear, and star structure: any
Maximum conductor length (twisted pair): 100 m
Supply voltage
Current consumption: 553 mA (115 V AC from FL SWITCH 4800E-P5)
Inrush surge current: 19 A (48 V DC from FL SWITCH 4800E-P1)
Additional Information:
SFP module with a data transmission speed of 1000 Mbps, a wavelength of 1310 nm, and a maximum transmission length of 2 km
Technical data
Ambient conditions
• Ambient temperature (operation) -40 °C ... 75 °C
• Ambient temperature (storage/transport) -40 °C ... 85 °C (non-condensing)
Interfaces
• Interface 1 : Ethernet FO
• No. of ports : 1 (LC multi-mode)
• Connection method : LC
• Transmission physics : multi-mode fiberglass
• Transmission speed : 1 Gbps
• Transmission length : 2 km (Fiberglass 50/125) and 1 km (Fiberglass 62.5/125)
• Wavelength : 310 nm
Media module - FL SFP SX2 - 2702397
Technical data
Interfaces
Signal LEDs : depending on the Factoryline device
Transmit capacity, minimum : -15 dBm
Transmit capacity, maximum : -1 dBm
Minimum receiver sensitivity : -23 dBm
Maximum receiver sensitivity : -3 dBm
Functions:
Basic functions SFP module as FO port
Status and diagnostic indicators via a Factoryline device
Supply voltage
Supply voltage : 3.3 V (via Factoryline switch)
Max. current consumption: 300 mA
Current consumption: 300 mA
General
Mounting type : Insert in SFP slot
Type AX : Factoryline devices with SFP slot
Net weight :30.4 g
Housing material : Metal
Classifications
eCl@ss
eCl@ss 4.0 : 27250501
eCl@ss 4.1 : 27250501
eCl@ss 5.0 : 27250501
eCl@ss 5.1 : 27250501
eCl@ss 6.0 : 19170106
eCl@ss 7.0 : 19170106
eCl@ss 8.0 : 27149249
eCl@ss 9.0 : 27144440
ETIM
ETIM 2.0 : EC000734
ETIM 3.0 : EC000734
ETIM 4.0 : EC000734
ETIM 5.0 : EC002609
ETIM 6.0 : EC002609
UNSPSC
UNSPSC 6.01 : 43172015
UNSPSC 7.0901 : 43201404
Media module - FL SFP SX2 - 2702397
Classifications
UNSPSC
UNSPSC 11 : 43172015
UNSPSC 12.01 : 43201410
Additional Information:
Modular power supply for FL SWITCH 48... managed switches. Wide input voltage range 90 V‚AC to
264 V AC and 88 V DC to 300 V DC.
· Network structure according to IEC 61850
· IEEE 1613
Technical data
Utilization restriction : EMC: class A product, see manufacturer's declaration in the download area
Dimensions
Width : 151 mm
Height : 40 mm
Depth : 214 mm
Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -40 °C ... 75 °C
Ambient temperature (storage/transport): -40 °C ... 85 °C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Power module - FL SWITCH 4800E-P5 - 2891076
Technical data
Nominal input voltage: 115 V AC
230 V AC
110 V DC
250 V DC
Nominal input voltage range: 90 V AC ... 264 V AC
88 V DC ... 300 V DC
AC frequency range: 50 Hz ... 60 Hz
General
Net weight : 884 g
Connection data, input
Connection method: Screw connection
Conductor cross section solid min.: 0.8 mm²
Conductor cross section solid max.: 6 mm²
Conductor cross section flexible min.: 0.8 mm²
Conductor cross section flexible max.: 6 mm²
Conductor cross section AWG min.: 18
Conductor cross section AWG max.: 10
Additional Information:
The small form-factor plug-in module is a plug-in fiber optic interface with a data transmission speed of 1000 Mbps, which is used in Gigabit Ethernet. Fiberglass module with a wavelength of 1300 nm (long).
Commercial Data:
sales group: K000
Pack: 1 Pcs.
Customs tariff: 85176200
Gross weight in pieces:0.0297 KG
Net weight per piece: 0.0286 KG
Catalog page information: Page 103 (AX-2011)
Technical data
Interfaces
Interface 1: Ethernet FO
No. of ports: 1 (LC single mode)
Connection method:1 LC socket at the SFP module, 1000 Mbps
Transmission physics: Single mode fiberglass
Transmission speed: 1 GBit/s
Transmission length: 30 km (Fiberglass 9/125)
250 m (Fiberglass 62.5/125)
Wavelength: 1310 nm
Signal LEDs: depending on the Factoryline device
Function
Basic functions : SFP module as FO port
Status and diagnostic indicators: via a Factoryline device
General data
Mounting type: Insert in SFP slot
Type AX: Factoryline devices with SFP slot
Ambient temperature (operation):-40 °C ... 85 °C (no condensation)
Ambient temperature (storage/transport): -40 °C ... 85 °C (no condensation)
Permissible humidity (operation):30 % ... 95 % (no condensation)
Permissible humidity (storage/transport): 30 % ... 95 % (no condensation)
Air pressure (operation) 86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport) 66 kPa ... 108 kPa (3500 m above sea level)
Housing material: Metal
Accessories
Cable/conductor
2989187 FL SM PATCH 1,0 LC-LC Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm, connector: LC/LC, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
2989190 FL SM PATCH 1,0 LC-SC Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm, connector: LC/SC duplex, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
2989242 FL SM PATCH 1,0 LC-ST Assembled fiber optic cable, break-out cable, fiberglass single mode 9/125 µm, connector: LC/B-FOC (ST), degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
Additional Information:
4.0/5
Rated by 27 Users