Reliserv Solution
Reliserv Solution
Panvel, Navi Mumbai, Thane, Maharashtra
GST No. 27AAOFR4891A1ZY
TrustSEAL Verified
Call 0804895276963% Response Rate
SEND EMAIL

Siemens Siprotec 5 Numerical Relay

SIPROTEC 5 is part of the new generation of incomparable modular, flexible, and intelligent digital field devices. With modularly designed hardware and software and its high-performance DIGSI 5 engineering tool, the SIPROTEC 5 product family of field devices are perfect for protection, control, monitoring, and measuring applications in electrical energy systems. SIPROTEC 5 offers a wide product range with modular elements for every application and requirement.

Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5

Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
  • Siprotec 5 Arc Protection, Optical Arc Detection For Siprotec 5
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Relay TypeVoltage Relay
BrandSiemens
Voltage220-240V
Current1A-5A
Frequency50/60 Hz
Protocolwith IEC 61850
Protection FunctionsPMU,FSR,SSR,CR,TR,PQR,ExTrFct

Electric arcs are among the most dreaded fault scenarios in power supply engineering. They can be caused by a multitude of factors, such as aging of the insulation, environmental conditions as well as operating errors. Electric arcs can cause heavy damage to switchgear and present a serious hazard to operating personnel. The SIPROTEC 5 arc protection detects electric arcs through an optical sensor. Arcs are detected reliably and quickly as they develop, and the protective device can trip immediately and without delay times.

The arc protection module is part of the new SIPROTEC 5 series of modular, flexible and intelligent bay devices and can be used in the following device types:

  • Support of feeder automation applications, e.g. fault isolation and service restoration
  • SIPROTEC 7SJ8
  • SIPROTEC 7SA8
  • SIPROTEC 7SD8
  • SIPROTEC 7SL8
  • SIPROTEC 7VK8
  • SIPROTEC 7UT8
  • SIPROTEC 7SK8
  • SIPROTEC 7UM8
  • Reliable arc detection
  • Extremely fast tripping time
  • Minimization of thermal damage
  • Higher personal safety
  • Minimization of downtimes
  • EMI safety thanks to purely optical sensors
  • Quick and easy retrofitting
Request
Callback
Yes! I am interested

Siprotec 5 Bay Controller

Siprotec 5 Bay Controller
  • Siprotec 5 Bay Controller
  • Siprotec 5 Bay Controller
  • Siprotec 5 Bay Controller
  • Siprotec 5 Bay Controller
  • Siprotec 5 Bay Controller
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandSiemens
Voltage220/240 V
Mounting TypeDin Rail
Current1A-5A
Binary Inputs11 to 75
Binary Outputs9 to 41

The SIPROTEC 5 Bay Controller is a control and automation device with optional protection function. It is designed for use in all voltage levels from distribution to transmission. As a full member of the SIPROTEC 5 family, it allows the use of a large number of protection functions from the SIPROTEC library with identical parameters like in the protection devices. The flexible hardware concept enables the exact fitting to all amount of process data.

Main function:Bay Controller for medium and high voltage switchgear. Integrated operator panel and key switches (optional). Powerful automation functionality, easily configurable with DIGSI. A large number of protection functions available.

Inputs and outputs:

  • 6 predefined standard variants with 8/8
  • current/voltage transformers,
  • 11 to 75 binary inputs,
  • 9 to 41 binary outputs

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

Further Functions

  • Integrated bay controller with versatile protection functions for applications from medium to extra high voltage
  • Control of up to 20 switching devices
  • Synchrocheck and switchgear interlocking system
  • Integrated electrical Ethernet port J for DIGSI
  • Supports integration into the station automation system with IEC 61850
  • Up to 4 pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, DNP3 (serial TCP), Modbus TCP)
  • Ethernet redundancy protocols PRP and HSR
  • Cyber Security in accordance with NERC CIP and BDEW whitepaper
  • Powerful automation with CFC (Continuous Function Chart)
  • Optional overcurrent protection for all voltage levels with 3-pole tripping
  • Also used in switchgear with breaker-and-a-half scheme
  • Selective protection of overhead lines and cables with single- and multi-ended in feeds for use with protection data communication
  • Overcurrent protection also configurable as backup function
  • Secure serial protection data communication, also over great distances and all available physical media (fiber-optic cable, 2-wire connections and communication networks)
  • Measurement of operational values
  • Auxiliary functions for simple tests and commissioning
Request
Callback
Yes! I am interested

Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay

Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
  • Siemens Reyrolle 7sr10 Over Current Protection Numerical Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Current Rating5A
BrandSiemens
Voltage24 V to 60 V DC, 60 V to 240 V AC/DC
Usage/ApplicationOvercurrent and Earth Fault protection solution for distribution & industrial applications
Model Name/NumberSiemens Reyrolle 7SR10
TypeIndustrial relays
Current1-5A
Country of OriginMade in India

Features

The Reyrolle 7SR10 Argus overcurrent and earth fault relay is developed using the latest generation of hardware technology and is available in multiple variants depending on the power supply, binary input/binary output configuration and data communication facility.
Housed in a 4U high, size 4 non-withdrawable case, these relays provide protection, monitoring, instrumentation, and metering with integrated input and output logic, data logging and fault reports. Communication access to the relay functionality is via a front USB port for local PC connection or rear electrical RS485 (optional) port for remote connection.

  • Cold load pickup (51C)
  • Two settings groups
  • Password protection – 2 levels
  • User programmable logic
  • Self-monitoring
  • Circuit breaker trip and maintenance counter

 Functions

Protection functions

  • Broken conductor, load unbalance (46BC)
  • Negative phase sequence overcurrent (46NPS)
  • Thermal overload (49)
  • Instantaneous overcurrent protection (50)
  • Instantaneous earth fault (50N/G)
  • Time delayed overcurrent protection (51)
  • Time delayed derived/measured earth fault protection (51N/G)
  • Cold load pickup (51C)
  • Circuit breaker fail (50BF)
  • Time delayed sensitive earth fault protection (51SEF)
  • Inrush restraint (81HBL2)
  • Instantaneous sensitive earth fault (50SEF)

Supervision functions

  • Trip circuit supervision (74TC)
  • Total harmonic distortion supervision (81THD)

Control functions

  • Lockout (86)
  • CB control
Request
Callback


Additional Information:

  • Item Code: SiemensReyrolle7SR10
  • Production Capacity: 50000 UNITS PER QUARTER
  • Delivery Time: 5-6 working days
  • Packaging Details: As per clients requirement.
Yes! I am interested

Siprotec 7sa86 Fast Distance Protection Automation Device

Siprotec 7sa86 Fast Distance Protection Automation Device
  • Siprotec 7sa86 Fast Distance Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sa86
BrandSIEMENS
Voltage220-240V
Usage/ApplicationDistance Protection
Mounting TypePanel
Current1A-5A
LEDs (max)82
RSTP (Ethernet ring redundancy)optional (additional price)
Case (x19'')1/3-2/1
Binary Outputs (max) incl. Life contact46
Transducer inputs (0-20 mA) (max)12
Small Display (lines)8
DIGSIYes
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Large, graphical Display (Pixel)320x240
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
DNP3 serialoptional (additional price)
IEC 60870-5-103optional (additional price)
Binary Inputs (max)31
20 mA unit connectionoptional (additional price)
Front User InterfaceYes
HSR (High available Seamless Ring configuration)optional (additional price)
Time SynchronisationYes
Push Buttons9
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Protection Functions21/21N, 21T ,25,27,49,49R, 50/51 TD ,50N/ 51N TD ,50HS ,50N/ 51N TD, 50Ns/ 51Ns,50BF
Current Inputs (max)8
DNP 3 TCPoptional (additional price)
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Pluggable terminal blocksYes
MODBUS TCPoptional (additional price)
IEC 60870-5-104optional (additional price)

The distance protection SIPROTEC 7SA86 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.

With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SA86 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Tripping:3-pole, min. tripping time 9 ms

Inputs and outputs:2 predefined standard variations with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system.

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • 6 independent measuring circuits (6 system distance protection)
  • Diverse distance protection methods available:
  • Classic, reactance method (RMD), impedance protection for transformers
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Adaptive power swing blocking, Out-of-Step protection
  • Detection of CT saturation for fast tripping and high accuracy at the same time
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchro check, and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Auxiliary functions for simple tests and commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7SL82 Line Differential and Distance Protection Automation Relay

Siprotec 7SL82 Line Differential and Distance Protection Automation Relay
  • Siprotec 7SL82 Line Differential and Distance Protection Automation Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SL82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Mounting TypeDin Rail
Current1A-5A
IEC 61850-8-1optional (additional price)
Time SynchronisationYes
Binary Outputs (max) incl. Life contact9/16
LEDs (max)16
Pluggable terminal blocksYes
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Case (x19'')1/3
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Small Display (lines)8
HSR (High available Seamless Ring configuration)optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
IEC 60870-5-104optional (additional price)
20 mA unit connectionoptional (additional price)
DIGSIYes
Protection Functions21/21N ,21T, 87L ,25, 27 32, 37, 38, 46,47 ,49, 50/51 TD, 50N/ 51N, TD 50HS , 50Ns/ 51Ns ,50BF, 50R
Binary Inputs (max)11/23
Transducer inputs (0-20 mA) (max)8
Push Buttons9
IEC 60870-5-103optional (additional price)
MODBUS TCPoptional (additional price)
DNP 3 TCPoptional (additional price)
RTD-unit connectionoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
DNP3 serialoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Current Inputs (max)8
Large, graphical Display (Pixel)320x240
Front User InterfaceYes

The combined line differential and distance protection relay SIPROTEC 7SL82 is part of the new SIPROTEC 5 series modular field devices.

This device is especially designed for cost effective and compact medium voltage and sub-transmission application areas.

With its flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SL82 fits perfectly for protection, control, monitoring, and measuring applica-tions in electrical energy systems.

Main function:Distance Protection for medium an sub-transmission

Tripping:

  • 3-pole, min. tripping time 19 ms

Inputs and outputs:

  • 4 current transformers, 4 voltage transformers (optional), 11 or 23 binary inputs, 9 or 16 binary outputs

Hardware flexibility:Various hardware quantity structures are available for binary inputs and outputs in the 1/3 base module, it is not possible to add 1/6 expansion modules, available with large and small display

Width of housing:1/3 x 19'inch'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 19 MS
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and com-plete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization using IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commis-sioning
Request
Callback
Yes! I am interested

Siprotec 7SL86 Distance Protection Automation Device

Siprotec 7SL86 Distance Protection Automation Device
  • Siprotec 7SL86 Distance Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SL86
BrandSIEMENS
Voltage220-240V
Usage/Applicationdistance protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
Current1A-5A
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Large, graphical Display (Pixel)320x240
MODBUS TCPoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Case (x19'')1/3-2/1
Pluggable terminal blocksYes
DIGSIYes
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Binary Inputs (max)31
LEDs (max)82
DNP 3 TCPoptional (additional price)
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
Time SynchronisationYes
IEC 60870-5-103optional (additional price)
20 mA unit connectionoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Protection Functions21/21N ,21T, 87L ,25, 27 32, 37, 38, 46,47 ,49, 50/51 TD, 50N/ 51N, TD 50HS , 50Ns/ 51Ns ,50BF, 50R
Binary Outputs (max) incl. Life contact46
Push Buttons9
Front User InterfaceYes
IEC 60870-5-104optional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Transducer inputs (0-20 mA) (max)12
Current Inputs (max)8
DNP3 serialoptional (additional price)
Small Display (lines)8

The combined line differential and distance protection SIPROTEC 7SL86 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices. With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SL86 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Differential and Distance Protection

Tripping:

  • 3-pole, min. tripping time 9 ms

Inputs and outputs:

  • 12 predefined standard variants with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 MS
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and com-plete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization using IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commis-sioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7SL87 Differential Distance Protection Automation Device

Siprotec 7SL87 Differential Distance Protection Automation Device
  • Siprotec 7SL87 Differential Distance Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/NumberSiprotec 7sl87
BrandSIEMENS
Voltage220-240V
Usage/ApplicationDifferential Distance Protection
Mounting TypeDin Rail
Relay TypeLine Differential Protection Automation Relay
HSR (High available Seamless Ring configuration)optional (additional price)
Protection Functions21/21N ,21T, 87L ,25, 27 32, 37, 38, 46,47 ,49, 50/51 TD, 50N/ 51N, TD 50HS , 50Ns/ 51Ns ,50BF, 50R
Small Display (lines)8
Front User InterfaceYes
Push Buttons9
IEC 60870-5-104optional (additional price)
IEC 61850-8-1optional (additional price)
Transducer inputs (0-20 mA) (max)12
LEDs (max)82
20 mA unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Binary Outputs (max) incl. Life contact46
MODBUS TCPoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Time SynchronisationYes
Current Inputs (max)8
DNP3 serialoptional (additional price)
Pluggable terminal blocksYes
RTD-unit connectionoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Case (x19'')1/3-2/1
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Large, graphical Display (Pixel)320x240
IEC 60870-5-103optional (additional price)
DNP 3 TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Binary Inputs (max)31
DIGSIYes

The combined line differential and distance protection SIPROTEC 7SL87 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SL87 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Differential and Distance Protection

Tripping:

  • 1- and 3-pole, min. tripping time 9 ms

Inputs and outputs:

  • 12 predefined standard variants with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system.

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation and capacitive charging currents
  • Diverse distance protection methods as backup or main 2 protection available: Classic, reactance method (RMD), impedance protection for transformers
  • Directional backup protection and various additional functions
  • Adaptive power swing blocking, Out-of-Step protection
  • Recognition of static and transient ground faults (transi-ent function) in resonant-grounded and isolated networks
  • Arc protection
  • Undervoltage-controlled reactive power protection
  • 1-/3-pole Automatic reclosing function
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7sj82 Overcurrent Protection Automation Device

Siprotec 7sj82 Overcurrent Protection Automation Device
  • Siprotec 7sj82 Overcurrent Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/NumberSiprotec 7sj82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationOvercurrent Protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
DIGSIYes
IEC 60870-5-104optional (additional price)
Large, graphical Display (Pixel)320x240
HSR (High available Seamless Ring configuration)optional (additional price)
Current Inputs (max)4
DNP3 serialoptional (additional price)
Binary Outputs (max) incl. Life contact9/16
IEC 60870-5-103optional (additional price)
20 mA unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Case (x19'')1/3
Pluggable terminal blocksYes
DNP 3 TCPoptional (additional price)
LEDs (max)16
RSTP (Ethernet ring redundancy)optional (additional price)
Binary Inputs (max)11/23
Transducer inputs (0-20 mA) (max)8
MODBUS TCPoptional (additional price)
RTD-unit connectionoptional (additional price)
Protection Functions24,25,27TN/ 59TN ,32,46,47,49,50/ 50N, SOTF, AFD, 50Ns ,51C, 51V, 55, 59, 59N, 59R, 27R, 60C, 60FL
IEC 61850-8-1optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Small Display (lines)8
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Front User InterfaceYes
Time SynchronisationYes
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Push Buttons9

The SIPROTEC Compact 7SJ82 is a multi-functional motor protection relay. It is designed for protection of asynchronous motors of all sizes. The relays have all the required functions to be applied as a backup relay to a transformer differential relay. The SIPROTEC Compact 7SK80 features “flexible protection functions”.

Up to 20 additional protection functions can be created by the user. Therefore protection of change for frequency or reverse power protection can be realized, for example. The relay provides circuit-breaker control, further switching devices and automation functions. The integrated programmable logic (CFC) allows the user to add own functions, e.g. for the automation of switchgear (interlocking). The user is also allowed to generate user-defined messages.

Highlights

  • Conformal coating available (NEW)
  • Pluggable current and voltage terminals
  • Binary input thresholds settable using DIGSI (3 stages)
  • Secondary current transformer values (1 A / 5 A) settable using DIGSI
  • 9 programmable function keys
  • 6-line display
  • Buffer battery exchangeable from the front
  • USB front port
  • 2 additional communication ports
  • Integrated switch for low-cost and redundant optical Ethernet rings
  • Ethernet redundancy protocols RSTP, PRP and HSR for highest availability
  • Relay-to-relay communication through Ethernet with IEC 61850 GOOSE
  • Millisecond-accurate time synchronization through Ethernet with SNTP (over Port A or Port B)
  • Number of binary binputs and inary outputs by connection from up to two SICAM I / O-Units extendable.

Protection functions

  • Overcurrent protection (50, 50N, 51, 51N)
  • Directional overcurrent protection, ground (67N)
  • Sensitive dir./non-dir. ground-fault detection (64Ns, 67Ns767N)
  • Motor protection
    • Undercurrent monitoring (37)
    • Starting time supervision (48)
    • Restart inhibit (66/86)
    • Locked rotor (14)
    • Load jam protection (51M)
  • Thermal Overload Protection (49)
  • Under-/overvoltage protection (27/59)
  • Frequency Protection (81O/U)
  • Breaker failure protection (50BF)
  • Unbalance-load protection (46)
  • Lockout (86)

Control functions/programmable logic

  • Commands for the ctrl. of CB, disconnect switches (isolators/isolating switches)
  • Control through keyboard, binary inputs, DIGSI 4 or SCADA system
  • User-defined PLC logic with CFC (e.g. intel.)

Monitoring functions

  • Operational measured values,
  • Energy metering valuesWp,Wq
  • Circuit-breaker wear monitoring
  • Minimum and maximum values
  • Trip circuit supervision
  • Fuse failure monitor
  • 8 oscillographic fault records
  • Motor statistics

Communication interfaces

  • System/service interface
    • IEC 61850 Edition 1 and 2
    • IEC 60870-5-103
    • PROFIBUS-DP
    • DNP 3.0
    • MODBUS RTU
  • Ethernet interface for DIGSI 4
  • USB front interface for DIGSI 4

Hardware

  • 4 current transformers
  • 0/3 voltage transformers
  • 3/7 binary inputs (thresholds configurable using software)
  • 5/8 binary outputs (2 changeover/Form C contacts)
  • 0/5 RTD inputs
  • 1 life contact
  • Pluggable current and voltage terminals
  • Conformal coating available (NEW)
Request
Callback
Yes! I am interested

Siprotec 7sj85 Feeder & Overcurrent Protection, Automation Device

Siprotec 7sj85 Feeder & Overcurrent Protection, Automation Device
  • Siprotec 7sj85 Feeder & Overcurrent Protection, Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sj85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationOvercurrent Protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
Time SynchronisationYes
MODBUS TCPoptional (additional price)
DNP3 serialoptional (additional price)
20 mA unit connectionoptional (additional price)
Small Display (lines)8
DIGSIYes
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Large, graphical Display (Pixel)320x240
Front User InterfaceYes
HSR (High available Seamless Ring configuration)optional (additional price)
Binary Outputs (max) incl. Life contact33
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
DNP 3 TCPoptional (additional price)
Pluggable terminal blocksYes
Case (x19'')1/3-2/1
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Push Buttons9
LEDs (max)82
Protection Functions24,25,27TN/ 59TN ,32,46,47,49,50/ 50N, SOTF, AFD, 50Ns ,51C, 51V, 55, 59, 59N, 59R, 27R, 60C, 60FL
IEC 60870-5-104optional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Transducer inputs (0-20 mA) (max)12
Binary Inputs (max)59
IEC 60870-5-103optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Current Inputs (max)4

The line differential protection SIPROTEC 7SD87 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SD87 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems

Main function:Differential Protection

Tripping:1- and 3-pole, min. tripping time 9 ms

Inputs and outputs:12 predefined standard variants with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Housing width:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation, and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • 3-pole automatic reclosing function
  • Control, synchro check, and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7SJ86 Overcurrent Protection Device

Siprotec 7SJ86 Overcurrent Protection Device
  • Siprotec 7SJ86 Overcurrent Protection Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SJ86
BrandSIEMENS
Voltage220-240V
Usage/ApplicationOvercurrent Protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
IEC 60870-5-104optional (additional price)
RTD-unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Case (x19'')1/3-2/1
Pluggable terminal blocksYes
RSTP (Ethernet ring redundancy)optional (additional price)
DIGSIYes
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
IEC 61850-8-1optional (additional price)
IEC 60870-5-103optional (additional price)
MODBUS TCPoptional (additional price)
Binary Inputs (max)23
Front User InterfaceYes
Current Inputs (max)4
Protection Functions24,25,27TN/ 59TN ,32,46,47,49,50/ 50N, SOTF, AFD, 50Ns ,51C, 51V, 55, 59, 59N, 59R, 27R, 60C, 60FL
Large, graphical Display (Pixel)320x240
DNP3 serialoptional (additional price)
DNP 3 TCPoptional (additional price)
20 mA unit connectionoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Small Display (lines)8
Transducer inputs (0-20 mA) (max)12
Push Buttons9
LEDs (max)82
Time SynchronisationYes
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Binary Outputs (max) incl. Life contact24

The feeder and overcurrent protection SIPROTEC 7SJ86 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.

With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SJ86 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems and for reserve or emergency protection for the line protection devices.

Main function:Overcurrent protection

Tripping:

  • 3-pole

Inputs and outputs:

  • 3 predefined standard variants with 4/4
  • current/voltage transformers,
  • 11 to 23 binary inputs,
  • 9 to 25 binary outputs

Hardware flexibility:Flexibly adjustable and expandable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Housing width:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Overcurrent protection with 3-pole tripping
  • Optimization of the tripping times by direction comparison and protection data communication
  • Recognition of static, intermitting and transient ground faults (transient function) in resonant-grounded and iso-lated networks
  • Arc protection
  • Overvoltage and undervoltage protection
  • Frequency protection and frequency change protection for load shedding applications
  • Power protection, configurable as active or reactive power protection
  • Protection functions for capacitor banks, e.g. overcurrent, thermal overload, current unbalance, peak overvoltage or differential protection
  • Undervoltage-controlled reactive power protection
  • Control, synchrocheck and system interlocking
  • Circuit-breaker failure protection
  • Circuit-breaker restrike protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization using IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning.
Request
Callback
Yes! I am interested

Siprotec 7sa82 Distance Protection Automation Relay

Siprotec 7sa82 Distance Protection Automation Relay
  • Siprotec 7sa82 Distance Protection Automation Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/NumberSiprotec 7sa82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
Binary Inputs (max)11/23
20 mA unit connectionoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
IEC 60870-5-103optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Small Display (lines)8
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Transducer inputs (0-20 mA) (max)8
Large, graphical Display (Pixel)320x240
LEDs (max)16
DNP 3 TCPoptional (additional price)
DIGSIYes
HSR (High available Seamless Ring configuration)optional (additional price)
IEC 60870-5-104optional (additional price)
Binary Outputs (max) incl. Life contact9/16
Case (x19'')1/3
Current Inputs (max)4
Pluggable terminal blocksYes
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
Time SynchronisationYes
Front User InterfaceYes
MODBUS TCPoptional (additional price)
DNP3 serialoptional (additional price)
Push Buttons9
Further Ethernet protocols on Ethernet modulesoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)

The distance protection relay SIPROTEC 7SA82 is part of the new SIPROTEC 5 series of modular field devices.

This device is especially designed for cost effective and compact medium-voltage and sub-transmission application areas.

With its flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SA82 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:SIPROTEC DistanceProtection for medium a sub-transmission

Tripping:3-pole, min. tripping time 19 ms

Inputs and outputs:

  • 4 current transformers,
  • 4 voltage transformers (optional),
  • 11 or 23 binary inputs,
  • 9 or 16 binary outputs

Hardware flexibility:Various hardware quantity structures are available for binary inputs and outputs in the 1/3 base module, it is not possible to add 1/6 expansion modules, available with large and small display.

Width of housing:1/3 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 19 MS
  • 6 independent measuring circuits (6 system distance protection)
  • Diverse distance protection methods available:
  • Classic, reactance method (RMD), impedance protection for transformers
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and iso-lated networks
  • Adaptive power swing blocking
  • Detection of CT saturation for fast tripping and high accuracy at the same time
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and com-plete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization using IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commis-sioning
Request
Callback
Yes! I am interested

Siprotec 7sa87 Fast Distance Protection Automation Device

Siprotec 7sa87 Fast Distance Protection Automation Device
  • Siprotec 7sa87 Fast Distance Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sa87
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Mounting TypeDin Rail
Current1A-5A
IEC 60870-5-104optional (additional price)
DIGSIYes
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Protection Functions21/21N, 21T ,25,27,49,49R, 50/51 TD ,50N/ 51N TD ,50HS ,50N/ 51N TD, 50Ns/ 51Ns,50BF
Small Display (lines)8
Front User InterfaceYes
DNP3 serialoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Pluggable terminal blocksYes
RTD-unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Binary Outputs (max) incl. Life contact46
IEC 60870-5-103optional (additional price)
Case (x19'')1/3-2/1
HSR (High available Seamless Ring configuration)optional (additional price)
DNP 3 TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
LEDs (max)82
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
MODBUS TCPoptional (additional price)
Transducer inputs (0-20 mA) (max)12
Large, graphical Display (Pixel)320x240
IEC 61850-8-1optional (additional price)
Binary Inputs (max)31
Push Buttons9
20 mA unit connectionoptional (additional price)
Time SynchronisationYes
Current Inputs (max)8

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • 6 independent measuring circuits (6 system distance protection)
  • Diverse distance protection methods available:
  • Classic, reactance method (RMD), impedance protection for transformers
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Adaptive power swing blocking, Out-of-Step protection
  • Detection of CT saturation for fast tripping and high accuracy at the same time
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchro check, and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and complete IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7sd82 Line Differential Protection Automation Relay Dealer

Siprotec 7sd82 Line Differential Protection Automation Relay Dealer
  • Siprotec 7sd82 Line Differential Protection Automation Relay Dealer
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sd82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Mounting TypeDin Rail
Relay TypeLine Differential Protection Automation Relay
IEC 60870-5-103optional (additional price)
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
IEC 60870-5-104optional (additional price)
DNP3 serialoptional (additional price)
Protection Functions87L,25,27,32, 37, 37,38 ,46 ,47 ,49 50/51 TD 50N/ 51N TD 50HS ,50N/ 51N TD 50Ns/ 51Ns ,50BF, 50RS, 5
Transducer inputs (0-20 mA) (max)8
IEC 61850-8-1optional (additional price)
20 mA unit connectionoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Small Display (lines)8
Push Buttons9
LEDs (max)16
MODBUS TCPoptional (additional price)
DIGSIYes
Time SynchronisationYes
Binary Inputs (max)11/23
RSTP (Ethernet ring redundancy)optional (additional price)
RTD-unit connectionoptional (additional price)
Front User InterfaceYes
Large, graphical Display (Pixel)320x240
DNP 3 TCPoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Binary Outputs (max) incl. Life contact9/16
Current Inputs (max)4
Pluggable terminal blocksYes
Case (x19'')1/3

The line differential protection relay SIPROTEC 7SD82 is part of the new SIPROTEC 5 series of modular field devices.

This device is especially designed for cost effective and compact medium voltage and sub-transmission application areas. With its flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SD82 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems

Main function:Line differential protection for medium and sub-transmission

Tripping:3-pole, min. tripping time 9 ms

Inputs and outputs:

  • 4 current transformers,
  • 4 voltage transformers (optional),
  • 11 or 23 binary inputs,
  • 9 or 16 binary outputs

Hardware flexibility:Various hardware quantity structures are available for binary inputs and outputs in the 1/3 base module, it is not possible to add 1/6 expansion modules,available with large and small display

Housing width:1/3 × 19 inch

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 19 MS
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation for fast tripping and high accuracy at the same time
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and com-plete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization using IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
Request
Callback
Yes! I am interested

Siprotec 7SD86 Fast Line Differential Protection Automation Device

Siprotec 7SD86 Fast Line Differential Protection Automation Device
  • Siprotec 7SD86 Fast Line Differential Protection Automation Device
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SD86
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Mounting TypeDin Rail
Current1A-5A
IEC 61850-8-1optional (additional price)
Time SynchronisationYes
DIGSIYes
Transducer inputs (0-20 mA) (max)12
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
MODBUS TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
RTD-unit connectionoptional (additional price)
20 mA unit connectionoptional (additional price)
Binary Outputs (max) incl. Life contact46
Large, graphical Display (Pixel)320x240
HSR (High available Seamless Ring configuration)optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
DNP3 serialoptional (additional price)
Protection Functions87L,25,27,32, 37, 37,38 ,46 ,47 ,49 50/51 TD 50N/ 51N TD 50HS ,50N/ 51N TD 50Ns/ 51Ns ,50BF, 50RS, 5
Small Display (lines)8
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
LEDs (max)82
IEC 60870-5-103optional (additional price)
DNP 3 TCPoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Case (x19'')1/3-2/1
Push Buttons9
Front User InterfaceYes
Current Inputs (max)8
Binary Inputs (max)31
IEC 60870-5-104optional (additional price)

The line differential protection SIPROTEC 7SD86 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SD86 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems

Main function:Differential Protection

Tripping:3-pole, min. tripping time 9 ms

Inputs and outputs:12 predefined standard variants with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Housing width:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation, and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • 3-pole automatic reclosing function
  • Control, synchro check, and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7SD87 Fast Line Differential Protection Automation Device, Siemens Siprotec Relay

Siprotec 7SD87 Fast Line Differential Protection Automation Device, Siemens Siprotec Relay
  • Siprotec 7SD87 Fast Line Differential Protection Automation Device, Siemens Siprotec Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SD87
BrandSIEMENS
Voltage220-240V
Usage/ApplicationLine protection
Relay TypeFast Line Differential Protection
Current1A-5A
Small Display (lines)8
Large, graphical Display (Pixel)320x240
Push Buttons9
IEC 61850-8-1optional (additional price)
DIGSIYes
Current Inputs (max)8
RTD-unit connectionoptional (additional price)
Time SynchronisationYes
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Front User InterfaceYes
20 mA unit connectionoptional (additional price)
Protection Functions87L,25,27,32, 37, 37,38 ,46 ,47 ,49 50/51 TD 50N/ 51N TD 50HS ,50N/ 51N TD 50Ns/ 51Ns ,50BF, 50RS, 5
Binary Inputs (max)31
Case (x19'')1/3-2/1
Pluggable terminal blocksYes
LEDs (max)82
IEC 60870-5-103optional (additional price)
DNP3 serialoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Binary Outputs (max) incl. Life contact46
MODBUS TCPoptional (additional price)
DNP 3 TCPoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
IEC 60870-5-104optional (additional price)
Transducer inputs (0-20 mA) (max)12
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)

The line differential protection SIPROTEC 7SD87 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SD87 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems

Main function:Differential Protection

Tripping:1- and 3-pole, min. tripping time 9 ms

Inputs and outputs:12 predefined standard variants with 4/4 or 8/8 current/voltage transformers, 5 to 31 binary inputs, 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Housing width:1/3 x 19'' to 2/1 x 19''

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation, and capacitive charging currents
  • Directional backup protection and various additional functions
  • Recognition of static, intermittent and transient ground faults (transient function) in resonant-grounded and isolated networks
  • Detection of CT saturation
  • Arc protection
  • Power protection, configurable as active or reactive power protection
  • Undervoltage-controlled reactive power protection
  • 3-pole automatic reclosing function
  • Control, synchro check, and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7VK87 Breaker Management Device And Breaker Failure Protection Relay

Siprotec 7VK87 Breaker Management Device And Breaker Failure Protection Relay
  • Siprotec 7VK87 Breaker Management Device And Breaker Failure Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/NumberSiprotec 7VK87
BrandSIEMENS
Voltage220-240V
Usage/ApplicationBreaker Failure Protection
Mounting TypeDin Rail
Relay TypeBreaker Failure Protection
Current1A-5A
Small Display (lines)8
IEC 61850-8-1optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Protection Functions25, 27 ,32, 37, 38, 46,,47 ,50/51 TD, 50HS , 50BF, 59, 59N ,67, 67N ,74TC, 79, 81, 86, 87N T, 90V
Case (x19'')1/3-2/1
Front User InterfaceYes
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
MODBUS TCPoptional (additional price)
RTD-unit connectionoptional (additional price)
IEC 60870-5-104optional (additional price)
Binary Outputs (max) incl. Life contact46
Current Inputs (max)8
Binary Inputs (max)31
Push Buttons9
IEC 60870-5-103optional (additional price)
20 mA unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
DNP 3 TCPoptional (additional price)
DIGSIYes
Transducer inputs (0-20 mA) (max)12
LEDs (max)82
DNP3 serialoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Time SynchronisationYes
Pluggable terminal blocksYes
Large, graphical Display (Pixel)320x240

The breaker management device SIPROTEC 7VK87 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7VK87 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Automatic reclosing, synchro check, circuit-breaker failure protection

Tripping:

  • 1- and 3-pole or 3-pole

Inputs and outputs:

  • 12 predefined standard variants with 4/4 or 8/8 current/voltage transformers,
  • 5 to 31 binary inputs,
  • 4 voltage transformers
  • 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Width of housing:

1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Automatic reclosing function and synchro check for line protection applications with 1- and 3-pole tripping
  • Circuit-breaker failure protection, 1-/3-pole
  • Control, synchro check, and system interlocking
  • Voltage controller for transformers
  • Arc protection
  • Voltage protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7UT82 Transformer Siemens Protection Relay

Siprotec 7UT82 Transformer Siemens Protection Relay
  • Siprotec 7UT82 Transformer Siemens Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7UT82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationTransformer protection
Mounting TypeDin Rail
Relay TypeTransformer protection
Pluggable terminal blocksYes
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Time SynchronisationYes
Protection Functions" 21/21N ,21T, 87L, 24 ,25, 27 ,32, 37, 32R, 38, 46, 47 ,49, 49H, 50/51 TD, 50HS ,50Ns/ 51Ns ,50BF
Binary Inputs (max)7
Binary Outputs (max) incl. Life contact7
Push Buttons9
IEC 60870-5-103optional (additional price)
RTD-unit connectionoptional (additional price)
IEC 61850-8-1optional (additional price)
20 mA unit connectionoptional (additional price)
Transducer inputs (0-20 mA) (max)8
Small Display (lines)8
Case (x19'')1/3
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
Front User InterfaceYes
DIGSIYes
Large, graphical Display (Pixel)320x240
LEDs (max)16
MODBUS TCPoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
IEC 60870-5-104optional (additional price)
DNP3 serialoptional (additional price)
DNP 3 TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Current Inputs (max)8

The transformer differential protection SIPROTEC 7UT82 is a universal protection, control, and automation device on the basis of the SIPROTEC 5 system. It is specially designed for the protection two winding transformers. It is the main protection for the transformer and contains many other protection and monitoring functions. The additional protection functions can also be used as backup protection for protected downstream objects (e.g. cables, line).

The device supports all SIPROTEC 5 system characteristics. It enables future-oriented system solutions with high investment security and low operating costs.

Main function:1 Differential protection (standard- or autotransformer) with add-on stabilizations; Up to 2 differential ground-fault protection

Useful measuring point:

  • 2 three-pole current measuring points 2 one-pole current measuring points

Inputs and outputs:1 predefined standard variant with 8 current transformers, 7 binary inputs, 7 binary outputs

Hardware flexibility:The 1/3 base module is available with IO103, it is not possible to add 1/6 expansion modules, available with the large and small display.

Width of housing:1/3×19''

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configuration provides support in determining the required number of function points for your device.

Further Functions

  • Transformer protection for two-winding transformers with versatile additional protection functions
  • Transformer differential protection for single-core phase-shift transformers
  • Universal usability of the admissible measuring points
  • Usable from medium up to extra-high voltage
  • Protection of standard power transformers and autotransformers
  • Increased sensitivity in the case of ground faults close to neutral through a separate ground-fault differential protection
  • Flexible adaptation to the transformer vector group
  • Consideration of inrush and over excitation processes
  • Safe behavior in the case of current transformer saturation with different degrees of saturation
  • Adaptive adjustment of the trip characteristic to the transformer tapping
  • Arc protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and complete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3
  • (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Time synchronization using IEEE 1588
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
Request
Callback
Yes! I am interested

Siprotec 7UT85 Two Winding Differential Protection Relay

Siprotec 7UT85 Two Winding Differential Protection Relay
  • Siprotec 7UT85 Two Winding Differential Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7ut85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationDifferential Protection Relay
Mounting TypeDin Rail
Relay TypeDifferential Protection Relay
Current1A-5A
IEC 61850-8-1optional (additional price)
LEDs (max)82
Pluggable terminal blocksYes
RSTP (Ethernet ring redundancy)optional (additional price)
Binary Outputs (max) incl. Life contact23
Front User InterfaceYes
IEC 60870-5-104optional (additional price)
IEC 60870-5-103optional (additional price)
DNP3 serialoptional (additional price)
Binary Inputs (max)19
Current Inputs (max)12
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
DNP 3 TCPoptional (additional price)
Push Buttons9
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Case (x19'')1/3-2/1
Small Display (lines)8
Large, graphical Display (Pixel)320x240
20 mA unit connectionoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
MODBUS TCPoptional (additional price)
RTD-unit connectionoptional (additional price)
DIGSIYes
Time SynchronisationYes
Protection Functions21/21N,21T,87L,24,25,27,32,37,32R,38,46,47,49,49H,50/51 TD,50HS,50Ns/ 51Ns,50BF
Transducer inputs (0-20 mA) (max)12
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)

The transformer differential protection SIPROTEC 7UT85 is a universal protection, control, and automation device on the basis of the SIPROTEC 5 system. It is specially designed for the protection two winding transformers. It is the main protection for the transformer and contains many other protection and monitoring functions. The additional protection functions can also be used as backup protection for protected downstream objects (e.g. cables, line).

The modular expansion capabilities of the hardware support you here. The device supports all SIPROTEC 5 system characteristics. It enables future-oriented system solutions with high investment security and low operating costs.

Main function:1 Differential protection (standard- or autotransformer) with add-on stabilizations; Up to 2 differential ground-fault protection

Useful measuring point:

  • 5 three-pole current measuring Points,
  • 3 one-pole current measuring points,
  • 3 three-pole voltage measuring Points,
  • 2 one-pole voltage measuring points expandable to 3 sides

Inputs and outputs:

  • 2 predefined standard variants with
  • 8 current transformers,
  • 7 to 19 binary inputs,
  • 7 to 23 binary outputs

Hardware flexibility:Flexible adaptable and expandable I/O quantity structure within the scope of the modular SIPROTEC 5-building blocks

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

Further Functions

  • Transformer protection for two-winding transformers with versatile additional protection functions expandable to 3 windings
  • Transformer differential protection for single-core phase-shift transformers
  • Universal usability of the admissible measuring points
  • Usable from medium up to extra-high voltage
  • Protection of standard power transformers and autotransformers
  • Increased sensitivity in the case of ground faults close to neutral through a separate ground-fault differential protection
  • Flexible adaptation to the transformer vector group
  • Consideration of inrush and over excitation processes
  • Safe behavior in the case of current transformer saturation with different degrees of saturation
  • Adaptive adjustment of the trip characteristic to the transformer tapping
  • Arc protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and complete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3
  • (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Time synchronization using IEEE 1588
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
Request
Callback
Yes! I am interested

Siprotec 7UT86 Three Winding Transformer Protection Relay

Siprotec 7UT86 Three Winding Transformer Protection Relay
  • Siprotec 7UT86 Three Winding Transformer Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7ut86
BrandSIEMENS
Voltage220-240V
Usage/ApplicationTransformer Protection
Mounting TypeDin Rail
Relay TypeTransformer Protection
Current1A-5A
HSR (High available Seamless Ring configuration)optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Case (x19'')1/3-2/1
20 mA unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Large, graphical Display (Pixel)320x240
Time SynchronisationYes
Binary Outputs (max) incl. Life contact34
Current Inputs (max)12
Pluggable terminal blocksYes
DIGSIYes
IEC 60870-5-104optional (additional price)
IEC 60870-5-103optional (additional price)
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
LEDs (max)82
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
DNP3 serialoptional (additional price)
MODBUS TCPoptional (additional price)
Transducer inputs (0-20 mA) (max)12
Front User InterfaceYes
DNP 3 TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Protection Functions" 21/21N,21T,87L,24,25,27,32,37,32R,38,46,47,49,49H,50/51 TD,50HS,50Ns/ 51Ns,50BF
Binary Inputs (max)23
Push Buttons9
Small Display (lines)8

The transformer differential protection SIPROTEC 7UT86 is a universal protection, control, and automation device on the basis of the SIPROTEC 5 system. It is especially designed for the protection of three winding transformers. It is the main protection for the transformers and contains many other protection and monitoring functions. The additional protection functions can also be used as backup protection for protected downstream objects (e.g. cables, line). At this, it supports also the modular availability of the hardware.

The device supports all SIPROTEC 5 system characteristics. It enables future-oriented system solutions with high investment security and low operating costs.

Main function:1 Differential protection (standard) with add-on stabilizations; Up to 3 differential ground-fault protection For autotransformer applications 2 differential protection functions in a function group, autotransformer can be used.

Useful measuring point:

  • 6 three-pole current measuring Points,
  • 4 one-pole current measuring points,
  • 3 four-pole voltage measuring Points,
  • 3 one-pole voltage measuring points
  • expandable to 4 sides

Inputs and outputs:

  • 2 predefined standard variants with
  • 12 current transformers,
  • 4 voltage transformers
  • 11 to 23 binary inputs,
  • 18 to 34 binary outputs

Hardware flexibility:Flexible adaptable and expandable I/O-quantity structure within the scope of the modular SIPROTEC 5-building blocks building blocks.

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

Further Functions

  • Transformer protection for two-winding transformers with versatile additional protection functions expandable to 3 windings
  • Transformer differential protection for single-core phase-shift transformers
  • Universal usability of the admissible measuring points
  • Usable from medium up to extra-high voltage
  • Protection of standard power transformers and autotransformers
  • Increased sensitivity in the case of ground faults close to neutral through a separate ground-fault differential protection
  • Flexible adaptation to the transformer vector group
  • Consideration of inrush and over excitation processes
  • Safe behavior in the case of current transformer saturation with different degrees of saturation
  • Adaptive adjustment of the trip characteristic to the transformer tapping
  • Arc protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and complete IEC 61850 functionality (reporting and GOOSE)
  • Two optional pluggable communication modules, usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3
  • (serial and TCP)
  • Serial protection data communication via fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Time synchronization using IEEE 1588
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
Request
Callback
Yes! I am interested

Siprotec 7UT87 Multiwinding Transformer Protection Relay

Siprotec 7UT87 Multiwinding Transformer Protection Relay
  • Siprotec 7UT87 Multiwinding Transformer Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7UT87
BrandSIEMENS
Voltage220-240V
Usage/ApplicationTransformer Protection
Mounting TypePanel
Current1A-5A
Large, graphical Display (Pixel)320x240
RSTP (Ethernet ring redundancy)optional (additional price)
Push Buttons9
Pluggable terminal blocksYes
DNP3 serialoptional (additional price)
Binary Inputs (max)27
Binary Outputs (max) incl. Life contact38
LEDs (max)82
Front User InterfaceYes
Transducer inputs (0-20 mA) (max)12
Small Display (lines)8
DNP 3 TCPoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
DIGSIYes
20 mA unit connectionoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Current Inputs (max)20
Case (x19'')1/3-2/1
PSU VariantsDC 24-48; DC 60-250 /AC 115-230
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Protection Functions" 21/21N,21T,87L,24,25,27,32,37,32R,38,46,47,49,49H,50/51 TD,50HS,50Ns/ 51Ns,50BF
MODBUS TCPoptional (additional price)
IEC 61850-8-1optional (additional price)
IEC 60870-5-103optional (additional price)
IEC 60870-5-104optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Time SynchronisationYes
RTD-unit connectionoptional (additional price)

The breaker management device SIPROTEC 7VK87 is part of the new SIPROTEC 5 series of modular, flexible and intelligent digital field devices.
With its modularity and flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7VK87 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Automatic reclosing, synchro check, circuit-breaker failure protection

Tripping:

  • 1- and 3-pole or 3-pole

Inputs and outputs:

  • 12 predefined standard variants with 4/4 or 8/8 current/voltage transformers,
  • 5 to 31 binary inputs,
  • 4 voltage transformers
  • 8 to 46 binary outputs

Hardware flexibility:Flexibly adjustable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Automatic reclosing function and synchro check for line protection applications with 1- and 3-pole tripping
  • Circuit-breaker failure protection, 1-/3-pole
  • Control, synchro check, and system interlocking
  • Voltage controller for transformers
  • Arc protection
  • Voltage protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication networks (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7sk82 Motor Protection Automation Device For Low To Medium Power Motors

Siprotec 7sk82 Motor Protection Automation Device For Low To Medium Power Motors
  • Siprotec 7sk82 Motor Protection Automation Device For Low To Medium Power Motors
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sk82
BrandSIEMENS
Voltage220-240V
Usage/ApplicationMotor Protection
Mounting TypeDin Rail
Current1A-5A
Binary Inputs (max)11/23
Push Buttons9
DNP 3 TCPoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Current Inputs (max)4
RTD-unit connectionoptional (additional price)
DIGSIYes
Small Display (lines)8
Large, graphical Display (Pixel)320x241
PSU VariantsDC 24-48; DC 60-250 /AC 115-231
IEC 60870-5-103optional (additional price)
DNP3 serialoptional (additional price)
Protection Functions" 14,24,25,27,32,37,32R,37,38,46,47,48,49,49R,50/51 TD,50HS,50Ns/ 51Ns,50BF,50RS
Transducer inputs (0-20 mA) (max)8
Front User InterfaceYes
20 mA unit connectionoptional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
MODBUS TCPoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Time SynchronisationYes
LEDs (max)82
Pluggable terminal blocksYes
Case (x19'')1/3-2/1
IEC 61850-8-1optional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
IEC 60870-5-104optional (additional price)
Binary Outputs (max) incl. Life contact9/16

The motor protection device SIPROTEC 7SK82 is part of the SIPROTEC 5 series of modular field devices.

This device is especially designed for cost effective and compact protection of low to medium power motor application areas. With its flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SK82 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Motor protection for small to medium size motors (100 kW to 2 MW)

Inputs and outputs:

  • 4 current transformers,
  • 4 voltage transformers (optional),
  • 11 or 23 binary inputs,
  • 9 or 16 binary outputs

Hardware flexibility:Various hardware configurations are available for binary inputs and outputs in the 1/3 base module, it is not possible to add 1/6 expansion modules, available with large and small display.

Width of housing:1/3×19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Motor protection functions: starting-time supervision, thermal overload protection for stator and rotor, restart inhibit, unbalanced load protection, load-jump protection
  • Stator and bearing temperature monitoring via a temperature sensors with an external RTD-box
  • Ground-fault protection (directional, non-directional) for the detection of stator ground-faults
  • Directional and non-directional time-overcurrent protection (short circuit protection) with additional functions
  • Detection of ground faults in systems with isolated or resonant neutral
  • Overvoltage and undervoltage protection
  • Power protection, configurable as active or reactive power protection
  • Control, synchrocheck and system interlocking
  • Arc protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Integrated electrical Ethernet port J for DIGSI
  • Single line presentation on a small or large display
  • Complete IEC 61850 (reporting and GOOSE) via integrated port J
  • Two optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, DNP3 (serial+TCP), Modbus TCP)
  • Ethernet redundancy protocols PRP and HSR
  • Cyber Security in accordance with NERC CIP and BDEW whitepaper
  • Secure serial protection data communication, also over great distances and all available physical media (fiber-optic cable, two-wire connections and communication networks)
  • Measurement of operational values
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning.
Request
Callback
Yes! I am interested

Siprotec 7SK85 Motor Protection, Automation Device For All Motor Sizes

Siprotec 7SK85 Motor Protection, Automation Device For All Motor Sizes
  • Siprotec 7SK85 Motor Protection, Automation Device For All Motor Sizes
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7sk85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationMotor Protection
Mounting TypeDin Rail
Current1A-5A
Transducer inputs (0-20 mA) (max)12
IEC 60870-5-104optional (additional price)
DNP 3 TCPoptional (additional price)
DIGSIYes
Push Buttons9
MODBUS TCPoptional (additional price)
Time SynchronisationYes
Small Display (lines)8
Large, graphical Display (Pixel)320x242
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Binary Inputs (max)27
Binary Outputs (max) incl. Life contact17
LEDs (max)82
PSU VariantsDC 24-48; DC 60-250 /AC 115-232
IEC 60870-5-103optional (additional price)
DNP3 serialoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
RTD-unit connectionoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Current Inputs (max)4
Case (x19'')1/3-2/1
IEC 61850-8-1optional (additional price)
Front User InterfaceYes
RSTP (Ethernet ring redundancy)optional (additional price)
Protection Functions14,24,25,27,32,37,32R,37,38,46,47,48,49,49R,50/51 TD,50HS,50Ns/ 51Ns,50BF,50RS,5
20 mA unit connectionoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Pluggable terminal blocksYes

The motor protection device SIPROTEC 7SK85 is part of the SIPROTEC 5 series of modular field devices.

This device is designed for the protection of all motor sizes. With its flexibility and its high-performance DIGSI 5 engineering tool, the SIPROTEC 7SK85 fits perfectly for protection, control, monitoring, and measuring applications in electrical energy systems.

Main function:Motor protection for all motor sizes

Inputs and outputs:

  • 3 predefined standard variants with 4 current
  • transformers, 4 voltage transformers,
  • 11 to 27 binary inputs, 9 to 17 binary outputs

Hardware flexibility:Flexibly adaptable and expandable I/O quantity structure within the scope of the modular SIPROTEC 5 building block, 1/6 expansion modules can be added. Available with large or small display or without display

Width of housing:1/3 x 19' to 2/1 x 19'

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Motor protection functions: starting-time supervision, thermal overload protection for stator and rotor, restart inhibit, unbalanced load protection, load-jump protection
  • Stator and bearing temperature monitoring via a temperature sensors with an external RTD-box
  • Ground-fault protection (directional, non-directional) for the detection of stator ground-faults
  • Directional and non-directional time-overcurrent protection (short circuit protection) with additional functions
  • Detection of ground faults in systems with isolated or resonant neutral
  • Overvoltage and undervoltage protection
  • Power protection, configurable as active or reactive power protection
  • Control, synchrocheck and system interlocking
  • Arc protection
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Integrated electrical Ethernet port J for DIGSI
  • Single line presentation on a small or large display
  • Complete IEC 61850 (reporting and GOOSE) via integrated port J
  • Two optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, DNP3 (serial+TCP), Modbus TCP)
  • Ethernet redundancy protocols PRP and HSR
  • Cyber Security in accordance with NERC CIP and BDEW whitepaper
  • Secure serial protection data communication, also over great distances and all available physical media (fiber-optic cable, two-wire connections and communication networks)
  • Measurement of operational values
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Powerful fault recording
Request
Callback
Yes! I am interested

Siprotec 7UM85 Generator Protection Device, Siemens Siprotec Differential Relay

Siprotec 7UM85 Generator Protection Device, Siemens Siprotec Differential Relay
  • Siprotec 7UM85 Generator Protection Device, Siemens Siprotec Differential Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7UM85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationGenerator Protection
Mounting TypeDin Rail
Relay TypeGenerator Protection
Time SynchronisationYes
Protection Functions21T, 24, 25,27 ,32, 37, 32R 37, 38 ,40, 46 ,47 ,48, 49, 49H, 49R, 50/51 TD, 50HS , 50Ns/ 51Ns ,50GN
Case (x19'')1/3-2/1
IEC 61850-8-1optional (additional price)
RTD-unit connectionoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
IEC 60870-5-103optional (additional price)
DIGSIYes
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Small Display (lines)8
PSU VariantsDC 24-48; DC 60-250 /AC 115-233
Transducer inputs (0-20 mA) (max)12
IEC 60870-5-104optional (additional price)
LEDs (max)82
MODBUS TCPoptional (additional price)
DNP3 serialoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Binary Outputs (max) incl. Life contact17
Current Inputs (max)4
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Binary Inputs (max)27
Large, graphical Display (Pixel)320x242
Push Buttons9
Front User InterfaceYes
DNP 3 TCPoptional (additional price)
20 mA unit connectionoptional (additional price)
Pluggable terminal blocksYes

The generator protection device SIPROTEC 7UM85 is especially designed for the protection of generators and power units. It contains all required main protection functions and numerous additional protection and monitoring functions.

Thanks to its modularity and flexibility and the powerful engineering tool DIGSI 5, SIPROTEC 7UM85 devices offer future-oriented system solutions with high investment security and low operating costs.

Main function:Typical generator protection functions

Inputs and outputs:

  • 3 predefined standard variants with 8 current transformers, 8 voltage transformers, 7 to 15 binary inputs, 9 to 20 binary outputs, 2 further standard variants with additional 4 transducers are in preparation.

Hardware flexibility:Flexible, adaptable and expandable I/O quantity structure within the scope of the modular SIPROTEC 5 building blocks, 1/6 expansion modules can be added Available with large or small display or without display

Width of housing:1/3 × 19 inch to 2/1 × 19 inch

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

  • Minimal tripping time 9 ms
  • Main protection function is differential protection with adaptive algorithm for maximum sensitivity and stability even at different CT errors, CT saturation and capacitive charging currents
  • Diverse distance protection methods as backup or main 2 protection available: Classic, reactance method (RMD), impedance protection for transformers
  • Directional backup protection and various additional functions
  • Adaptive power swing blocking, Out-of-Step protection
  • Recognition of static and transient ground faults (transi-ent function) in resonant-grounded and isolated networks
  • Arc protection
  • Undervoltage-controlled reactive power protection
  • 1-/3-pole Automatic reclosing function
  • Control, synchrocheck and system interlocking
  • Powerful automation with graphical CFC (Continuous Function Chart)
  • Support of single line in small and large displays
  • Integrated electrical Ethernet port J for DIGSI and IEC 61850 functionality (reporting)
  • Up to four optional pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, Modbus TCP, DNP3 (serial and TCP)
  • Serial protection data communication over fiber-optic cable, two-wire connections and communication net-works (IEEE C37.94 et al.) including automatic switch over between ring and chain topology
  • High available Ethernet redundancy protocols PRP and HSR
  • Cyber Security acc. NERC CIP and BDEW Whitepaper
  • Phasor Measurement Unit (PMU) for synchrophasor-measured values and IEEE C37.118 protocol
  • Time synchronization IEEE 1588
  • Powerful fault recording
  • Additional functions for simple tests and easy commissioning
  • Adjustable I/O quantity within the scope of the SIPROTEC 5 modular system
Request
Callback
Yes! I am interested

Siprotec 7SS85 Cost Effective Differential Current Protection

Siprotec 7SS85 Cost Effective Differential Current Protection
  • Siprotec 7SS85 Cost Effective Differential Current Protection
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7SS85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationDifferential Current Protection
Relay TypeDifferential Current Protection
Voltage Typeon
DNP 3 TCPoptional (additional price)
Transducer inputs (0-20 mA) (max)12
Small Display (lines)8
Large, graphical Display (Pixel)320x240
LEDs (max)82
IEC 61850-8-1optional (additional price)
DIGSIoptional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Time SynchronisationYes
Binary Inputs (max)15
PSU VariantsDC 24-48; DC 60-250 /AC 115-233
IEC 60870-5-104optional (additional price)
Pluggable terminal blocksYes
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
DNP3 serialoptional (additional price)
Key Switchoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
Protection Functions27,38,47,50/51 TD,50BF,50EF,59,59N,74TC,81,86,87B,87,STUB,PMU
Case (x19'')1/2-1/1; 2x1/1
Current Inputs (max)80
IEC 60870-5-103optional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Front User InterfaceYes
Push Buttons9

The centralized busbar protection SIPROTEC 7SS85 is a selective, safe, and fast protection against busbar faults in medium voltage, high-voltage and very high voltage systems with the most various busbar configurations.

Busbar protection devices SIPROTEC 7SS85 are part of the modular SIPROTEC 5 series and their main function bases on the principle of differential protection.

Additional protection and control functions extend the scope of application to a comprehensive station protection.

The flexibility of the functions and the modular hardware structure allow an optimum adaptation of the 7SS85 to the most various system configurations and functional requirements.

Functionality
The centralized busbar protection SIPROTEC 7SS85 encompasses the following maximum quantity structure:

  • 20 3-phase measuring points (current transformer)

  • 4 3phase measuring points (voltage transformer)

  • 26 bays (feeders, couplers, bus-section disconnections)

  • 4 bus zones (busbar sections with measuring function)

  • 4 couplers (with 1 or 2 current transformers)

  • 2 auxiliary busbars (busbar sections without measuring function)

  • Phase-selective measurement and Display

  • Selective tripping of faulty busbar sections

  • Optional additional decentralized binary in- and outputs via protection interface (PI) or IEC 61850 (GOOSE) provide new concepts for busbar protection

Request
Callback
Yes! I am interested

Siprotec 6MD85 Siemens Protection Relay

Siprotec 6MD85 Siemens Protection Relay
  • Siprotec 6MD85 Siemens Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number6MD85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationOvercurrent Protection
Mounting TypeDin Rail
Phaseon
Binary Inputs (max)59
Time SynchronisationYes
Current Inputs (max)4
PSU VariantsDC 24-48; DC 60-250 /AC 115-233
Further Ethernet protocols on Ethernet modulesoptional (additional price)
IEC 60870-5-104optional (additional price)
DNP 3 TCPoptional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Binary Outputs (max) incl. Life contact33
LEDs (max)82
Pluggable terminal blocksYes
IEC 61850-8-1optional (additional price)
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
Large, graphical Display (Pixel)320x240
Front User InterfaceYes
Protection Functions25,27,32,37,38,46,49,50/51 TD,50HS,51V,59,74TC,81,86,90V,PMU,AFD
Push Buttons9
Key Switchoptional (additional price)
DNP3 serialoptional (additional price)
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Transducer inputs (0-20 mA) (max)12
Case (x19'')1/3-2/1
Small Display (lines)8
DIGSIoptional (additional price)
RSTP (Ethernet ring redundancy)optional (additional price)
IEC 60870-5-103optional (additional price)

With the help of skillful team, we present an extensive range of Siprotec Digital Grid. Our products are available in varied configurations that meet on consumers demand.


Features:

 

  • Durable nature

  • Top performance

  • Accurate dimensions

  • Easy to install

  • Longer service life

  • Low maintenance

 

The SIPROTEC5 Bay Controller is a universal control and automation device with optional protection function. It is designed for use in all voltage levels from distribution to transmission. As a full member of the SIPROTEC 5 family, it allows the use of a large number of protection functions from the SIPROTEC library with identical parameters like in the protection devices. The flexible hardware concept enables the exact fitting to all amount of process data.


Main function:

Bay Controller for medium and high voltage switchgears. Integrated operator panel and key switches (optional). Powerful automation functionality, easily configurable with DIGSI. Large number of protection functions available.


Inputs and outputs:

5 predefined standard variants with 4/4 current/voltage transformers,11 to 75 binary inputs,9 to 41 binary outputs


Hardware flexibility:

Flexible adjustable HW IO-quantity within the scope of the SIPROTEC5 modular system. The use of a second row allows more than 400 in- and outputs.


Width of housing:

1/3 x 19 Inch - 2/1 x 19 Inch

Request
Callback


Additional Information:

  • Item Code: SIPROTEC-6MD85
Yes! I am interested

Siprotec 6MD86 Siemens Protection Relay

Siprotec 6MD86 Siemens Protection Relay
  • Siprotec 6MD86 Siemens Protection Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number6MD86
BrandSIEMENS
Voltage220-240V
Usage/ApplicationOvercurrent Protection
Mounting TypeDin Rail
Relay TypeVoltage Relay
IEEE 1588 C37.238 profile (PSRC - profile)optional (additional price)
Key Switchoptional (additional price)
Pluggable terminal blocksYes
IEC 60870-5-103optional (additional price)
DNP 3 TCPoptional (additional price)
Protection Functions" 25,27,32,37,38,46,49,50/51 TD,50HS,51V,59,74TC,81,86,90V,PMU,AFD "
Case (x19'')1/3-2/1
RSTP (Ethernet ring redundancy)optional (additional price)
Large, graphical Display (Pixel)320x240
Push Buttons9
IEC 61850-8-1optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
Transducer inputs (0-20 mA) (max)12
Current Inputs (max)4
IEC 60870-5-104optional (additional price)
Further Ethernet protocols on Ethernet modulesoptional (additional price)
Binary Inputs (max)43
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
LEDs (max)82
PSU VariantsDC 24-48; DC 60-250 /AC 115-233
Front User InterfaceYes
DNP3 serialoptional (additional price)
Small Display (lines)8
DIGSIoptional (additional price)
Time SynchronisationYes
Binary Outputs (max) incl. Life contact80

The SIPROTEC 5 Bay Controller is a control and automation device with optional protection function. It is designed for use in all voltage levels from distribution to transmission. As a full member of the SIPROTEC 5 family, it allows the use of a large number of protection functions from the SIPROTEC library with identical parameters like in the protection devices. The flexible hardware concept enables the exact fitting to all amount of process data.

Main function:Bay Controller for medium and high voltage switchgear. Integrated operator panel and key switches (optional). Powerful automation functionality, easily configurable with DIGSI. A large number of protection functions available.

Inputs and outputs:

  • 6 predefined standard variants with 8/8
  • current/voltage transformers,
  • 11 to 75 binary inputs,
  • 9 to 41 binary outputs

All functions can be configured freely with DIGSI 5. For the application of some of the functions, you require the appropriate number of free function points within the device. The function point calculator in the online configurator provides support in determining the required number of function points for your device.

Further Functions

  • Integrated bay controller with versatile protection functions for applications from medium to extra high voltage
  • Control of up to 20 switching devices
  • Synchrocheck and switchgear interlocking system
  • Integrated electrical Ethernet port J for DIGSI
  • Supports integration into the station automation system with IEC 61850
  • Up to 4 pluggable communication modules usable for different and redundant protocols (IEC 61850, IEC 60870-5-103, IEC 60870-5-104, DNP3 (serial TCP), Modbus TCP)
  • Ethernet redundancy protocols PRP and HSR
  • Cyber Security in accordance with NERC CIP and BDEW whitepaper
  • Powerful automation with CFC (Continuous Function Chart)
  • Optional overcurrent protection for all voltage levels with 3-pole tripping
  • Also used in switchgear with breaker-and-a-half scheme
  • Selective protection of overhead lines and cables with single- and multi-ended in feeds for use with protection data communication
  • Overcurrent protection also configurable as backup function
  • Secure serial protection data communication, also over great distances and all available physical media (fiber-optic cable, 2-wire connections and communication networks)
  • Measurement of operational values
  • Phasor for synchrophasor measured values and IEEE C37.118 protocol integratedMeasurment Unit (PMU) Powerful fault recording
  • Auxiliary functions for simple tests and commissioning
Request
Callback
Yes! I am interested

Siprotec 7KE85 Powerful Fault Recorder, Siemens Siprotec Relay

Siprotec 7KE85 Powerful Fault Recorder, Siemens Siprotec Relay
  • Siprotec 7KE85 Powerful Fault Recorder, Siemens Siprotec Relay
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Model Name/Number7KE85
BrandSIEMENS
Voltage220-240V
Usage/ApplicationFault Recorder
Mounting TypeDin Rail
Relay TypeFault Recorder
Large, graphical Display (Pixel)320x240
Pluggable terminal blocksYes
Time SynchronisationYes
IEC 61850-8-1Yes
DIGSIYes
Binary Inputs (max)43
Protection FunctionsPMU ,FSR, SSR ,CR, TR ,PQR ,ExTrFct
Binary Outputs (max) incl. Life contact33
Small Display (lines)8
PRP V1 (Parallel Redundancy Protocol)optional (additional price)
PSU VariantsDC 24-48; DC 60-250 /AC 115-233
Front User InterfaceYes
RSTP (Ethernet ring redundancy)optional (additional price)
Transducer inputs (0-20 mA) (max)32
Current Inputs (max)36
Transducer inputs (0-10 V) (max)32
Further Ethernet protocols on Ethernet modulesoptional (additional price)
IEC 61850-9-2optional (additional price)
HSR (High available Seamless Ring configuration)optional (additional price)
LEDs (max)82
Push Buttons9

The SIPROTEC 7KE85 is a powerful fault recorder with inte-grated measuring of synchrophasors (PMU) according to IEEE C37.118 and Power Quality measurement according to IEC 61000-4-30. Due to the high flexibility of trigger functions, the SIPROTEC 7KE85 is ideally suited to monitor the entire energy value chain from generation to distribution. The powerful automation and flexible configuration with DIGSI 5 comple-ments the range of functions.

Main function:

Fault Recorder

Inputs and outputs:

4 predefined standard variants with up to 40 current and 40 voltage transformers, 43 binary inputs, 33 binary outputs

Hardware flexibility:

Flexibly adjusted and expandable I/O quantity structure within the scope of the SIPROTEC 5 modular system

Housing width

1/3 to 1/1 x 19‘‘


  • Up to 40 analog channels

  • Fast scan recorder

  • Up to 2 slow scan recorders

  • Up to 5 continuous recorders and 2 trend recorders

  • Power Quality recordings according to IEC 61000-4-30
    (Harmonics, THD, TDD in preparation)

  • Sequence of event recorder for continuous recording of binary status changes and IEC 61850 GOOSE Messages

  • Applicable as Phasor Measurement Unit (PMU) according to IEEE C37.118 standard

  • Transmission of records and triggering via IEC 61850 GOOSE messages

  • Sampling frequencies parameterizable from 1 kHz to
    16 kHz

  • The user can allocate the 16-gigabyte buffer (16 GByte) to the various recorders

  • Intelligent monitoring routines of the storage medium ensure a high security of the archived data

  • Loss-free data compression

  • Time synchronization via Precision Time Protocol (PTP) IEEE 1588 Protocol, IRIG-B, DCF77 and SNTP

  • Free routing of measured values to the individual recorders

  • Free combination of the measuring groups for power calculation

  • Quality Attributes for representing the current signal quality in a time signal view

  • The trigger functions of a function block are the value of the fundamental component, RMS value, zero-sequence/positive sequence/ negative-sequence system, frequency, Σ active power/ Σ reactive power / Σ apparent power

  • Level trigger and gradient trigger for each trigger function

  • Flexible cross, network and manual trigger

  • Creating of own trigger functions using the graphic automation editor CFC (Continuous Function Chart)

  • Trigger functions by combining single-point/double-point indications, analog values, binary signals, Boolean signals and GOOSE messages

  • Cyber Security according NERC CIP and BDEW Whitepaper

Request
Callback
Yes! I am interested

Process Bus Numerical Relay Siemens

Process Bus Numerical Relay Siemens
  • Process Bus Numerical Relay Siemens
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemens
Voltage220/240 V
Mounting TypeWall Mounted
Relay TypeVoltage Relay
Current1 to 5 A
Frequency50/60 Hz
PhaseSingle Phase

The SIPROTEC merging units are installed close to the instrument transformer, and the measured current and voltage values are reliably communicated to the protection devices over the process bus, using the PRP or HSR protocol. This approach reduces cable complexity, simplifies workflows, and makes both new and existing systems extremely economical and safe. To guarantee interoperability and future viability, the innovative process bus solutions from Siemens are, of course, certified according to IEC 61850-9-2.
Request
Callback
Yes! I am interested

Siemens Numerical Relay

Siemens Numerical Relay
  • Siemens Numerical Relay
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemens
PhaseSingle Phase
Relay TypeVoltage Relay
Current1A-5A
Input12 binary inputs
Output8 binary outputs
ProtocolIEC 61850-9-2

Merging Unit SIPROTEC 6MU80 for conventional instrument transformers. This device allows conversion of current substations to process bus substations without change in the primary equipment. The advantages of process bus can be used, but also a mixed configuration of process bus / non-process bus is possible.

Siemens process bus solutions not only fulfill the standard but increase customer value beyond.

Request
Callback
Yes! I am interested

Siprotec 6MU80 Merging Unit

Siprotec 6MU80  Merging Unit
  • Siprotec 6MU80  Merging Unit
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemens
Voltage220-240V
Current1A-5A
Time synchronizationPPS, IRIG-B or GPS
Communication ProtocolIEC 61850
Binary Inputs12
Binary Outputs8

Merging Unit SIPROTEC 6MU80 for conventional instrument transformers. This device allows conversion of current substations to process bus substations without change in the primary equipment.

 

The advantages of process bus can be used, but also a mixed configuration of process bus / non-process bus is possible.

 

Siemens process bus solutions not only fulfill the standard but increase customer value beyond.

The SIPROTEC 6MU80 Merging Units are not only certified according IEC 61850-9-2LE for process bus applications but include a lot of additional features. Some, but not all, of the additional features are:

  • extended temperature range (-40 ºC – 70 °C)
  • configurable 12 Binary Inputs / 8 Binary Outputs
  • Time synchronization via PPS, IRIG-B or GPS
  • full support IEC 61850-8-1 GOOSE
  • PRP and HSR (IEC 62439)
  • integrated Web-Server
  • comprehensive engineering with DIGSI
  • full integration of whole substations in process bus technology by keeping well known engineering concepts of SIPROTEC.
Request
Callback
Yes! I am interested

Siemens Siprotec 6MU805 Siprotec 5 Numerical Relay

Siemens Siprotec 6MU805 Siprotec 5 Numerical Relay
  • Siemens Siprotec 6MU805 Siprotec 5 Numerical Relay
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemens
Voltage220-240V
Mounting TypeDin Rail
Current1A-5A
Binary Inputs (max)11/23
Binary Outputs (max) incl. Life contact9/16
Protection Functions14,24,25,27,32,37,32R,37,38,46,47,48,49,49R,50/51 TD,50HS,50Ns/ 51Ns,50BF,50RS

Merging unit SIPROTEC 6MU805 for conventional instrument transformers. 

Features

This device allows conversion of current substations to process bus substations without change in the primary equipment. The advantages of process bus can be used, but also a mixed configuration of process bus / non-process bus is possible.

Siemens process bus solutions not only fulfill the standard but increase customer value beyond.

Request
Callback
Yes! I am interested

Siemens Siprotec 6MU85 Siprotec 5 Numerical Relay

Siemens Siprotec 6MU85 Siprotec 5 Numerical Relay
  • Siemens Siprotec 6MU85 Siprotec 5 Numerical Relay
Ask For Price
Product Price :Get Latest Price

Product Details:

BrandSiemens
Voltage220-240V
Mounting TypeDin Rail
Model Name/Number6MU85
Current1A-5A
Binary Inputs (max)11/23
Binary Outputs (max) incl. Life contact9/16
Protection Functions14,24,25,27,32,37,32R,37,38,46,47,48,49,49R,50/51 TD,50HS,50Ns/ 51Ns,50BF,50RS

The new SIPROTEC 6MU85 merging unit bases on the flexible SIPROTEC 5 system has been designed for conventional and non-conventional instrument transformers (LPITs) and digitalizes all primary data close to the process. SIPROTEC 5 process bus provides versatile solutions and migration concepts for new and existing systems.

Features

Main functions:

  • Merging unit
  • Bay unit for distributes busbur protection SIPROTEC 7SS85
  • Breaker functions
  • Backup protection functions
  • Additional functions
Request
Callback
Yes! I am interested

Siprotec 7VE85

Siprotec 7VE85
  • Siprotec 7VE85
Ask For Price
Product Price :Get Latest Price

Product Details:

Model Name/Number7VE85
BrandSIEMENS
Voltage220-240V
Usage/Applicationsynchronization of generators
Mounting TypeDin Rail
Current1A-5A

Paralleling device SIPROTEC 7VE85 is specifically designed for the synchronization of generators (power plant units) with the power grid or synchronization of 2 electricity-supply systems.

The 1.5- and 2-channel synchronization function is the made function of the SIPROTEC 7VE85. To warrant a high level of security and reliability, the software works with various monitoring functions. In addition, the most important hardware components are duplicated. Two different measuring algorithms are used in accordance with the multi-channel redundancy. This avoids overfunctions through systematic errors. At the same time, the different methods of measurement are applied and processed independently of each other with different memory areas. The high level of reliability and flexible options to adapt to the equipment requirements allow a wide variety of applications.

Request
Callback
Yes! I am interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Piyush Rathi (Partner)
Reliserv Solution
Office No. 9, Plot No. 53/54, Space Heights, Sector 34
Panvel, Navi Mumbai - 410209, Thane, Maharashtra, India


Call Us


Send E-mail